Woow zigbee fresh air
WOOWTECH·Woow_zigbee_fresh_air_pcb·hardware/WO30109_FreshAir/WO30109_FreshAir.kicad_pcb
About the Woow zigbee fresh air PCB
Woow zigbee fresh air is an open source ESP32 PCB design by WOOWTECH, published on GitHub. It is a 2-layer board measuring 63.4 × 83.1 mm, with 68 components from 34 distinct parts.
Its main chip is the ESP32-C6-WROOM-1-N8, from the ESP32 family. Other key parts include the IRM-02-12, SYN480R, AP63203WU-7, TLP290-4 and ST25DV04KC-IE6S3. By type, the board carries 20 resistors, 18 capacitors, 6 ICs, 4 transistors, 4 connectors and 4 relays.
It belongs with the iot & wireless designs in this gallery.
From the project
WO_30109 Zigbee 新風控制器 PCB(KiCad 10,git 版控;V1.3 重繪 + V2.0 安規改版)
220V 供電、4 路繼電器輸出的 Zigbee 新風(換氣扇)控制板。V3.0 起由一顆 ESP32-C6 同時負責 Zigbee 3.0 連網與控制,433MHz 遙控由 SYN480R 接收、ESP32 解碼(V2.0 以前是 STM32F103+Tuya ZS3L+EPA09-4D 模組)。
這個 repo 是把原設計 V1.3(Altium,外包設計)完整轉成 KiCad 10,用 git 做版控,並在 V2.0 修掉安規問題。
背面圖中藍色是 GND 鋪銅,白色帶是市電周圍 6.4mm 的安全帶(DRC 規則自動退讓)。完整原理圖:V3.0/V2.0。V3.0 左緣是 ESP32-C6 模組(天線端下方禁銅),左上是 SYN480R 433MHz 接收。
- 電路架構 - V1.3 → V2.0 改了什麼 - 安規隔離設計 - Repo 結構 - 怎麼改設計(範例) - 版本控制流程 - 自動檢查(CI) - 設計驗證報告 - 主要料件 - 已知限制與待辦

Main components on the Woow zigbee fresh air
Woow zigbee fresh air bill of materials (BOM)
68 components, 34 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C6-WROOM-1-N8 | Espressif_ESP32-C6-WROOM-1 | U1 |
| 1 | IRM-02-12 | Converter_ACDC_MeanWell_IRM-02-xx_THT | U2 |
| 1 | SYN480R | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | AP63203WU-7 | TSOT-23-6 | U4 |
| 1 | TLP290-4 | SOP-16_4.55x10.3mm_P1.27mm | U5 |
| 1 | ST25DV04KC-IE6S3 | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 4 | Si2302CDS | SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | 13.52127MHz 20pF | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | DI 12V/IN1-4/COM/GND | TerminalBlock_Pluggable_1x07_P2.54mm_Horizontal | J5 |
| 1 | NFC ANT | JST_SH_BM02B-SRSS-TB_1x02-1MP_P1.00mm_Vertical | J6 |
| 1 | AC IN 230V | TerminalBlock_Pluggable_1x02_P5.00mm_Horizontal | P1 |
| 1 | AC OUT | TerminalBlock_Pluggable_1x08_P5.08mm_Horizontal | P3 |
| 1 | TS-1088-AR02016 | SW_SPST_TS-1088 | B1 |
| 1 | T3.15A 250V | Fuseholder_TR5_Littelfuse_No560_No460 | F1 |
| 4 | G5Q-1 DC12 | Relay_SPDT_Omron-G5Q-1_Tight | K1, K2, K3, K4 |
| 1 | 07D471K | RV_Disc_D7mm_W3.4mm_P5mm | RV1 |
| 4 | B5819W | D_SOD-123 | D1, D2, D3, D4 |
| 1 | Blue | LED_0603_1608Metric | L1 |
| 1 | 3.9uH | L_Sunlord_SWPA4030S | L2 |
| 1 | 47nH | L_0603_1608Metric | L3 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 33nH | L_0603_1608Metric | L4 |
| 3 | 22uF 25V | C_0805_2012Metric | C1, C7, C13 |
| 5 | 100nF | C_0603_1608Metric | C2, C9, C12, C14, C23 |
| 2 | 1uF | C_0603_1608Metric | C5, C17 |
| 1 | 10uF 25V | C_0603_1608Metric | C6 |
| 1 | 10uF | C_0603_1608Metric | C8 |
| 2 | 2.7pF C0G | C_0603_1608Metric | C15, C16 |
| 4 | 10nF | C_0603_1608Metric | C18, C19, C20, C21 |
| 9 | 10k | R_0603_1608Metric | R1, R2, R3, R9, R10, R11, R12, R24 +1 |
| 1 | 100R | R_0603_1608Metric | R4 |
| 4 | 1k | R_0603_1608Metric | R5, R6, R7, R8 |
| 1 | 0R | R_0603_1608Metric | R14 |
| 4 | 3.3k | R_1206_3216Metric | R15, R16, R17, R18 |
| 1 | 1.5k | R_1206_3216Metric | R23 |
Woow zigbee fresh air design files
The KiCad project lives in the WOOWTECH/Woow_zigbee_fresh_air_pcb repository on GitHub; these links point at the commit this page was built from.
Woow zigbee fresh air: common questions
What microcontroller does the Woow zigbee fresh air use?
The Woow zigbee fresh air is built around the ESP32-C6-WROOM-1-N8, from the ESP32 family.
How big is the Woow zigbee fresh air PCB?
The Woow zigbee fresh air measures 63.4 × 83.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Woow zigbee fresh air?
68 components, from 34 distinct parts. The full bill of materials is listed on this page.
Where can I download the Woow zigbee fresh air design files?
From the WOOWTECH/Woow_zigbee_fresh_air_pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Woow zigbee fresh air design in my own project?
The repository has no license, so all rights stay with WOOWTECH. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Woow zigbee fresh air without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k