5 open source boards using the TLP290-4
Real designs built with the TLP290-4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Porsche quad gauge
Evancli
98 × 98 mm57 partsCC-BY-SA-4.03STM32
Precharge controller board
wangyanyu1817
100 × 100 mm212 parts2LNo license0STM32
PCB Tarjeta DevOps
Kolicks
100 × 190 mm182 parts2LCC0-1.00ESP32
Woow zigbee fresh air
WOOWTECH
63.4 × 83.1 mm68 parts2LNo license0- schematic only · 296 parts
Kicad support tools
t2t-io
296 partsMIT0
The TLP290-4 in open source designs
The gallery holds 5 open source boards using the TLP290-4 from 5 GitHub repositories; a typical one measures about 99 × 99 mm and carries around 182 components.
100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is Porsche quad gauge by Evancli.
Microcontrollers on boards using the TLP290-4
What boards using the TLP290-4 are built for
TLP290-4: common questions
Where can I find a TLP290-4 reference design?
Each of the 5 boards on this page is a real design using the TLP290-4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TLP290-4 use?
Most are built on STM32 (2), AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the TLP290-4?
The median is 99 × 99 mm, and 100% are two-layer designs.
What is the most popular open source board using the TLP290-4?
By GitHub stars, Porsche quad gauge by Evancli, with 3 stars.
Can I simulate one of these boards using the TLP290-4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.