Starbie

wuffgame·Starbie·Starbie_PCB/Starbie_PCB.kicad_pcb

Starbie PCB layout, top view — open source ESP32 board by wuffgame

About the Starbie PCB

Starbie is an open source ESP32 PCB design by wuffgame, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 64 × 80.5 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the sensors and displays & leds designs in this gallery.

From the project

A homemade portable Tamagotchi. Built using the Half-Life guide from Hack Club.

A homemade portable Tamagotchi. Built using the Half-Life guide from Hack Club.

I decided it was time to build something other than just another software project, so I joined YSWS Half-Life, where I was able to build the project from scratch using a guide.

- XIAO ESP32 C3 - OLED 0.96 - MPU6050 - DHT11 - Custom PCB

Thanks Hack Club and Half Life for giving me the motivation to start with hardware projects.

Main components on the Starbie

Starbie bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
DHT11
U1
1
XIAO-ESP32-C3-SMD
U2
1
Conn_01x04_Pin
J1
1
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2
1
10k
R1

Starbie design files

The KiCad project lives in the wuffgame/Starbie repository on GitHub; these links point at the commit this page was built from.

Starbie: common questions

What microcontroller does the Starbie use?

The Starbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Starbie PCB?

The Starbie measures 64 × 80.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Starbie?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Starbie design files?

From the wuffgame/Starbie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Starbie design in my own project?

Yes, under the terms of its GPL-3.0 license, which wuffgame chose for the repository.

Can I test firmware for the Starbie without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards