WU-MSNS6101HT
About the WU-MSNS6101HT PCB
WU-MSNS6101HT is an open source PCB design by WunschUnreif, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 30 × 30 mm, with 32 components from 20 distinct parts.
Other key parts include the MPU-6050, LMV358 and 74AHC1G08. By type, the board carries 16 resistors, 5 capacitors, 3 ICs, 3 diodes, 2 transistors and 2 connectors.
It belongs with the sensors designs in this gallery.
From the project
A module based on motion sensor MPU-6050 with a controllable heater to provide a constant working temperature.
A module based on motion sensor MPU-6050 with a controllable heater to provide a constant working temperature.
The project uses KiCad for schematic and PCB drawing.
Main components on the WU-MSNS6101HT
WU-MSNS6101HT bill of materials (BOM)
32 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U1 |
| 1 | LMV358 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | 74AHC1G08 | SOT-23-5_HandSoldering | U3 |
| 2 | AO3400A | SOT-23-3 | Q1, Q2 |
| 2 | Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical | J1, J2 |
| 1 | MF52 10K | PinHeader_1x02_P2.54mm_Vertical | TH1 |
| 1 | GREEN | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | YELLOW | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | RED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | 10uF | CP_EIA-3216-10_Kemet-I_Pad1.58x1.35mm_HandSolder | C1 |
| 1 | 10nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 2 | 100nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C4 |
| 1 | 2.2nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5 |
| 5 | 4.7k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R8, R9, R13, R14 |
| 3 | 470 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R7, R12 |
| 3 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R6, R16 |
| 2 | 47 | R_2512_6332Metric_Pad1.52x3.35mm_HandSolder | R4, R5 |
| 1 | 22k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10 |
| 1 | 100k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11 |
| 1 | 1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R15 |
WU-MSNS6101HT design files
The KiCad project lives in the WunschUnreif/WU-MSNS6101HT repository on GitHub; these links point at the commit this page was built from.
- LayoutWU-MSNS6101HT.kicad_pcb
WU-MSNS6101HT: common questions
How big is the WU-MSNS6101HT PCB?
The WU-MSNS6101HT measures 30 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WU-MSNS6101HT?
32 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the WU-MSNS6101HT design files?
From the WunschUnreif/WU-MSNS6101HT repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the WU-MSNS6101HT design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which WunschUnreif chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956