41 open source boards using the 74AHC1G08
Real designs built with the 74AHC1G08, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Batterymeter
hb020
106.1 × 29.2 mm143 parts4LNo license20Meowality
gatecat
200 × 75 mm248 parts6LISC17Agnus
LinuxJedi
81.8 × 46.1 mm22 parts4LGPL-2.010440BX
raszpl
304.8 × 243.8 mm650 parts4LGPL-3.06Chip lcd dip
cmnybo
41.4 × 61.1 mm22 parts2LNo license5CPU2908CP4
m-okada
240 × 195 mm590 parts2LNo license3RP2040/RP2350
Mainboard
luhbots
96 × 60 mm175 parts4LNo license2WU-MSNS6101HT
WunschUnreif
30 × 30 mm32 parts2LCC-BY-4.02AOS16 Control Unit
AJain9199
90 × 88 mm121 parts4LNo license1RTB C12
git4dcc
90.3 × 26.6 mm93 parts4LApache-2.01GP8B
JonathSpirit
133 × 93 mm105 parts4LCERN-OHL-W-2.00Safety edge interface
ste-man
93 × 78 mm67 parts2LNo license0AVR/Arduino
Monodiffuse
elixpo
35.8 × 34 mm46 parts2LMIT0Multiprise pilotée
INSA-GEI
184 × 107.5 mm43 parts2LGPL-3.00- schematic only · 562 partsRaspberry Pi
OpenXTCM5-Head-Unit
mibs510
562 parts2LMIT0 - schematic only · 9 parts
Circuitos umg
jhosef-re
9 partsNo license0 STM32
3ch motor control
Netetra
75 × 70 mm62 parts2LNo license0TTSI
JacobParent7
71 × 46 mm32 parts2LNo license4ALU
AJain9199
100 × 100 mm70 parts4LNo license1Operacake
Meteora-Z
120 × 75 mm152 partsNo license0FPGA
Alu
jerry-kerenzikov
100 × 51.9 mm78 parts4LCERN-OHL-S-2.00STM32
New-3ch motor control
Netetra
75 × 70 mm62 parts2LNo license0Operacake
Charmve
120 × 75 mm152 partsBSD-2-Clause354OctalBusDisplay
TechPaula
100 × 51 mm17 parts2LNo license7Operacake
alexmfz
120 × 75 mm152 partsGPL-2.03Operacake
JensLiu
120 × 75 mm152 partsGPL-2.01Operacake
greearb
120 × 75 mm152 partsGPL-2.01Operacake
Toysoft
120 × 75 mm152 partsGPL-2.00Operacake
deepin-community
120 × 75 mm152 partsGPL-2.00Operacake
2ftg
120 × 75 mm152 partsGPL-2.00WD1771 Board
roberto314
100 × 100 mm78 parts2LBSD-2-Clause0Dc v1 vcut
Netetra
61 × 43 mm46 parts2LNo license0FPGA
O2 breakout
m-okada
95 × 72 mm101 parts2LNo license3STM32
Antenna db
queens-satellite-team
94 × 94 mm59 parts4LNo license1Memory 64K
jerry-kerenzikov
100 × 51.9 mm59 parts4LCERN-OHL-S-2.00Memory Controller
AJain9199
88 × 86 mm49 parts4LNo license1
How designs wire the 74AHC1G08
Read from the KiCad layouts of 30 open source designs, one per repository: what each pin of the 74AHC1G08 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 19 of 30 designs, most often 100 nF (then 10 nF).
- The TXD pin has a pull-up to VCC on 13 of 30 designs, most often 10 kΩ (then 3.3 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| TXDpin 1 | Connected to: Signal 100% |
|
| VSSpin 2 | Connected to: A connector 30% |
|
| GNDpin 3 | Connected to: GND 97% | — |
| VCCpin 5 | Connected to: 3.3V 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Operacake by Charmve, Batterymeter by hb020, Meowality by gatecat and Agnus by LinuxJedi.
The 74AHC1G08 in open source designs
The gallery holds 41 open source boards using the 74AHC1G08 from 33 GitHub repositories; a typical one measures about 100 × 75 mm and carries around 70 components.
59% are two-layer designs, the rest use four layers or more, and 51% carry an open source license.
The most starred is Operacake by Charmve.
Parts used alongside the 74AHC1G08
Microcontrollers on boards using the 74AHC1G08
What boards using the 74AHC1G08 are built for
74AHC1G08: common questions
Where can I find a 74AHC1G08 reference design?
Each of the 41 boards on this page is a real design using the 74AHC1G08. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74AHC1G08 VCC pin?
The VCC pin has a decoupling capacitor on 19 of 30 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 30 open source designs using the 74AHC1G08.
What pull-up resistor is used on the 74AHC1G08 TXD pin?
The TXD pin has a pull-up to VCC on 13 of 30 designs, most often 10 kΩ (then 3.3 kΩ). Counted from the KiCad layouts of 30 open source designs using the 74AHC1G08.
What parts are used alongside the 74AHC1G08?
The SKY13322, 74AHC1G32, 74AHC1G04, GSG-74HC04 and GSG-74HC08 appear in the most repositories here.
Which microcontrollers do boards using the 74AHC1G08 use?
Most are built on AVR/Arduino (3), STM32 (3), FPGA (2) and Raspberry Pi (1).
How big is a typical board using the 74AHC1G08?
The median is 100 × 75 mm, and 59% are two-layer designs.
What is the most popular open source board using the 74AHC1G08?
By GitHub stars, Operacake by Charmve, with 354 stars.
Can I simulate one of these boards using the 74AHC1G08 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.