Mic writte ai
wupsbr·mic-writte-ai·hardware/mic-writte-ai.kicad_sch

About the Mic writte ai PCB
Mic writte ai is an open source ESP32 PCB design by wupsbr, published on GitHub under the MIT license. It is a board, with 51 components from 30 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the MSM261S4030H0R, USBLC6-2SC6, TP4056 and AP2112K-3.3. By type, the board carries 18 resistors, 13 capacitors, 5 ICs, 4 switches, 4 diodes and 3 connectors.
It belongs with the iot & wireless and audio designs in this gallery.
From the project
Gravador de áudio de bolso para eventos — 56×39×16 mm, 12 h de gravação, um botão, Bluetooth. Hardware aberto em KiCad, pronto para fabricação e montagem na JLCPCB.
Gravador de áudio de bolso para eventos, projetado do zero para ser fabricado e montado na JLCPCB.
Você liga a chave, aperta um botão e ele grava. Aperta de novo, para. Depois, perto do celular, o app Android busca as gravações por Bluetooth sozinho — sem você abrir nada.
O aparelho grava em Opus, o mesmo formato do WhatsApp: 12 h de evento ocupam ~130 MB em vez dos ~1,4 GB que o áudio sem compressão ocuparia. A qualidade continua ótima para voz e para transcrição por IA depois.
Main components on the Mic writte ai
Mic writte ai bill of materials (BOM)
51 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N16R8 | ESP32-S3-WROOM-1 | U1 |
| 1 | MSM261S4030H0R | MSM261S4030H0R_LGA-8_4.0x3.0mm | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | TP4056 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U4 |
| 1 | AP2112K-3.3 | SOT-23-5 | U5 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | TF-01A | microSD_HC_Hirose_DM3D-SF | J2 |
| 1 | LiPo 803450 | J3 | |
| 1 | 2A | R_1206_3216Metric | F1 |
| 1 | liga/desliga | SW_SPST_B3S-1000 | SW1 |
| 1 | GRAVAR | SW_SPST_B3S-1000 | SW2 |
| 1 | BOOT | SW_SPST_B3S-1000 | SW3 |
| 1 | RESET | SW_SPST_B3S-1000 | SW4 |
| 1 | UART_TX | TestPoint_Pad_D1.0mm | TP1 |
| 1 | UART_RX | TestPoint_Pad_D1.0mm | TP2 |
| 1 | B5819W | D_SOD-123 | D1 |
| 1 | vermelho | LED_0603_1608Metric | D2 |
| 1 | verde | LED_0603_1608Metric | D3 |
| 1 | azul | LED_0603_1608Metric | D4 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 10u | C_0805_2012Metric | C1, C2, C3, C10, C13 |
| 2 | 22u | C_0805_2012Metric | C4, C7 |
| 5 | 100n | C_0402_1005Metric | C5, C6, C8, C11, C12 |
| 1 | 1u | C_0402_1005Metric | C9 |
| 2 | 5k1 | R_0402_1005Metric | R1, R2 |
| 1 | 2k4 | R_0402_1005Metric | R3 |
| 2 | 100k | R_0402_1005Metric | R4, R14 |
| 2 | 1M | R_0402_1005Metric | R5, R6 |
| 8 | 10k | R_0402_1005Metric | R7, R8, R9, R10, R11, R12, R13, R15 |
| 3 | 1k | R_0402_1005Metric | R16, R17, R18 |
Mic writte ai design files
The KiCad project lives in the wupsbr/mic-writte-ai repository on GitHub; these links point at the commit this page was built from.
- Schematichardware/mic-writte-ai.kicad_sch
Mic writte ai: common questions
What microcontroller does the Mic writte ai use?
The Mic writte ai is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.
How many components are on the Mic writte ai?
51 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mic writte ai design files?
From the wupsbr/mic-writte-ai repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Mic writte ai design in my own project?
Yes, under the terms of its MIT license, which wupsbr chose for the repository.
Can I test firmware for the Mic writte ai without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k