ExoAnchor P4 V2.4A6
wxffxx·ExoAnchor-Hardware·ESP32P4/exoanchor-p4-v2.4a6/KiCad/ExoAnchor_P4_V2.4A6.kicad_pcb
About the ExoAnchor P4 V2.4A6 PCB
ExoAnchor P4 V2.4A6 is an open source ESP32 PCB design by wxffxx, published on GitHub under the MIT license. It is a 6-layer board measuring 64.5 × 67 mm, with 190 components from 53 distinct parts.
Its main chip is the ESP32-P4NRW32, from the ESP32 family. Other key parts include the CH343P, EMH4T2R, BLM18PG121SN1D, GD5F2GQ5UEYIGR and AT24C16C-STUM-T. By type, the board carries 91 capacitors, 58 resistors, 23 ICs, 4 diodes, 3 crystals and 3 inductors.
From the project
Prepared on 2026-10-22. The board is named ESP32P4PrototypeV2.4a6; its PCB silkscreen reads Prototype V2.4A6.
Prepared on 2026-10-22. The board is named ESP32P4PrototypeV2.4a6; its PCB silkscreen reads Prototype V2.4A6.
This directory contains that board and its dependencies. The JLCEDA project was extracted from existing local archives. The KiCad conversion includes targeted repairs and connectivity comparisons. No current cloud-project synchronization was performed. Chinese documentation is authoritative.
Main components on the ExoAnchor P4 V2.4A6
ExoAnchor P4 V2.4A6 bill of materials (BOM)
190 components, 53 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CH343P WCH(南京沁恒) | TQFN-16_L3.0-W3.0-P0.50-BL-EP1.7__72e19bbc | U1, U17 |
| 1 | EMH4T2R ROHM(罗姆) | SOT-563-6_L1.6-W1.2-P0.50-LS1.6-BL__0ee4edd2 | U2 |
| 7 | BLM18PG121SN1D muRata(村田) | L0603__0fd5099d | U3, U8, U14, U15, U16, U20, U21 |
| 1 | GD5F2GQ5UEYIGR GigaDevice(兆易创新) | WSON-8_L6.0-W8.0-P1.27-BL-EP__e8e18484 | U4 |
| 1 | AT24C16C-STUM-T MICROCHIP(美国微芯) | SOT-23-5_L2.9-W1.6-P0.95-LS2.8-BL__13f3e689 | U5 |
| 1 | MS2109 | QFN-48_L7.0-W7.0-P0.50-TL-EP4.1__b8ae6dac | U6 |
| 1 | TPS22918DBVR TI(德州仪器) | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR__682be208 | U7 |
| 3 | TLV62569DBVR TI(德州仪器) | SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR__f09f3096 | U9, U10, U18 |
| 1 | AQS221R2S PANASONIC(松下) | SO-16_L10.3-W4.4-P1.27-LS7.0-BL__4ca11b91 | U11 |
| 1 | PCIe*1 | PCIe_1 key__ebaa1119 | U12 |
| 1 | ESP32-P4NRW32 ESPRESSIF(乐鑫) | QFN-104_L10.0-W10.0-P0.35-TL-EP7.5__563c2754 | U13 |
| 1 | DP83825IRMQR TI(德州仪器) | HVQFN-24_L3.0-W3.0-P0.40-TL-EP1.9__a0141fe0 | U19 |
| 1 | ZX-SH1.0-2PLT Megastar(兆星) | CONN-SMD_2P-P1.00_MEGASTAR_ZX-SH1.0-2PLT__055f5efb | U22 |
| 1 | GD25Q127CYIGR GigaDevice(兆易创新) | WSON-8_L6.0-W8.0-P1.27-BL-EP__e8e18484 | U24 |
| 1 | 40MHz YXC(扬兴晶振) | OSC-SMD_4P-L3.2-W2.5-BL_SIT8008BI__8f1a8610 | X2 |
| 1 | 24MHz YXC(扬兴晶振) | CRYSTAL-SMD_4P-L3.2-W2.5-BL__9c9dbee8 | X3 |
| 1 | 25MHz YXC(扬兴晶振) | CRYSTAL-SMD_4P-L3.2-W2.5-BL__9c9dbee8 | X4 |
| 1 | HR911105A HANRUN(汉仁) | RJ45-TH_HR911105A__b23e0a26 | J2 |
| 1 | XKTF-1307-18 XKB Connection(中国星坤) | TF-SMD_XKTF-1307-18__7bd28ea8 | CARD1 |
| 1 | X6521WR-2x12H-C60D30 XKB Connection(中国星坤) | HDR-TH_24P-P2.54-H-M-R2-C12-S2.54__3c5d6a9e | H1 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HDMI-001S XUNPU(讯普) | HDMI-SMD_HDMI-001S__cd4ec1f9 | HDMI1 |
| 1 | HX TYPE-C 16P L8.35 hanxia(韩下) | USB-C-SMD_HX-TYPE-C-16P-L8.35__cf6aeb05 | USB2 |
| 1 | ZX-SH1.0-4PLT Megastar(兆星) | CONN-SMD_4P-P1.00_ZX-SH1.0-4PLN__1f3f9af2 | USB_JTAG1 |
| 1 | NCD0603R1 国星光电 | LED0603-RD_RED__01a96b01 | LED1 |
| 1 | NCD0603R1 国星光电 | LED0603-RD_RED__01c91157 | MS_LED1 |
| 2 | SLPESD0603M05 Slkor(萨科微) | D0603-BI__29d920bd | D1, D4 |
| 2 | TPD4E05U06DQAR TI(德州仪器) | USON-10_L2.5-W1.0-P0.50-BL__5b0cdc5b | D2, D3 |
| 3 | 2.2uH cjiang(长江微电) | IND-SMD_L3.0-W3.0_FNR30XXS__6930f09c | L2, L3, L4 |
| 4 | 1uF SAMSUNG(三星) | C0402__aba8f707 | C1, C59, C61, C64 |
| 44 | 100nF SAMSUNG(三星) | C0402 去耦电容__92f207f8 | C2, C5, C6, C14, C39, C40, C41, C42 +36 |
| 6 | 1uF SAMSUNG(三星) | C0603__a4480e4e | C3, C7, C10, C11, C12, C99 |
| 5 | 4.7uF SAMSUNG(三星) | C0805__eb27e37a | C4, C68, C70, C87, C88 |
| 6 | 100nF YAGEO(国巨) | C0603__a4480e4e | C8, C19, C20, C29, C35, C89 |
| 16 | 10uF SAMSUNG(三星) | C0805__eb27e37a | C9, C27, C28, C31, C32, C33, C34, C37 +8 |
| 1 | 1nF FH(风华) | C0402__aba8f707 | C13 |
| 9 | 22pF FH(风华) | C0402__aba8f707 | C15, C16, C17, C18, C30, C36, C90, C96 +1 |
| 15 | 10kΩ FOJAN(富捷) | R0402__b4a31b25 | R1, R12, R13, R14, R15, R16, R17, R18 +7 |
| 3 | 5.1kΩ UNI-ROYAL(厚声) | R0402__b4a31b25 | R2, R4, R5 |
| 6 | 2.2kΩ UNI-ROYAL(厚声) | R0402__b4a31b25 | R3, R8, R9, R11, R34, R53 |
| 1 | 453kΩ FOJAN(富捷) | R0603__0f1821c5 | R6 |
| 3 | 100kΩ UNI-ROYAL(厚声) | R0603__0f1821c5 | R7, R21, R22 |
| 6 | 2.49kΩ FOJAN(富捷) | R0402__b4a31b25 | R10, R43, R59, R60, R62, R63 |
| 3 | 22Ω UNI-ROYAL(厚声) | R0402__b4a31b25 | R20, R28, R48 |
| 1 | 1kΩ UNI-ROYAL(厚声) | R0603__0f1821c5 | R23 |
| 2 | 1kΩ UNI-ROYAL(厚声) | R0603__52b39882 | R24, R40 |
| 1 | 6.49kΩ FOJAN(富捷) | R0402__b4a31b25 | R27 |
| 2 | 4.02kΩ Tyohm(幸亚电阻) | R0402__b4a31b25 | R29, R30 |
| 2 | 0Ω UNI-ROYAL(厚声) | R0402__b4a31b25 | R31, R61 |
| 1 | 4.7kΩ UNI-ROYAL(厚声) | R0603__0f1821c5 | R32 |
| 3 | 4.7kΩ UNI-ROYAL(厚声) | R0603__601aad73 | R35, R36, R37 |
| 2 | 47kΩ UNI-ROYAL(厚声) | R0603__0f1821c5 | R38, R39 |
| 4 | 499kΩ FOJAN(富捷) | R0603__0f1821c5 | R44, R45, R46, R47 |
| 3 | 510Ω FOJAN(富捷) | R0603__0f1821c5 | R49, R50, R51 |
ExoAnchor P4 V2.4A6 design files
The KiCad project lives in the wxffxx/ExoAnchor-Hardware repository on GitHub; these links point at the commit this page was built from.
ExoAnchor P4 V2.4A6: common questions
What microcontroller does the ExoAnchor P4 V2.4A6 use?
The ExoAnchor P4 V2.4A6 is built around the ESP32-P4NRW32, from the ESP32 family.
How big is the ExoAnchor P4 V2.4A6 PCB?
The ExoAnchor P4 V2.4A6 measures 64.5 × 67 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the ExoAnchor P4 V2.4A6?
190 components, from 53 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ExoAnchor P4 V2.4A6 design files?
From the wxffxx/ExoAnchor-Hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ExoAnchor P4 V2.4A6 design in my own project?
Yes, under the terms of its MIT license, which wxffxx chose for the repository.
Can I test firmware for the ExoAnchor P4 V2.4A6 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in ExoAnchor-Hardware
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k