TiNA
wyolum·TiNA·KiCAD/TiNA.kicad_pcb
About the TiNA PCB
TiNA is an open source AVR/Arduino PCB design by wyolum, published on GitHub. It is a 2-layer board measuring 121.9 × 99.8 mm, with 102 components from 62 distinct parts.
Its main chip is the ATMEGA328, from the AVR/Arduino family. Other key parts include the MCP1700T-3V3 SOT23-3, MCP1700T-3V3 SOT89, TXB0104D, TSOP382 and DS3231N. By type, the board carries 26 capacitors, 21 connectors, 16 resistors, 9 ICs, 6 switches and 2 diodes.
From the project
Standalone controller for TIM (The Intelligent Matrix)
Standalone controller for TIM (The Intelligent Matrix)
To install arduino libraries: 1. download and unzip (or git clone) the files to a local directory for example, my this is /home/justin/code/TiNA 2. set your arduino sketchbook path to the arduino subdirectory of your install path by either a. editing your ~/.arduino/preferences.txt (the sketchbook.path variable) b. selecting from the "File->Preferences" drop down menu item for example, my sketchbook path is /home/justin/code/TiNA/arduino 3. start or restart the Arduino IDE
Main components on the TiNA
TiNA bill of materials (BOM)
102 components, 62 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1700T-3V3 SOT23-3 | SOT23-3 | U1 |
| 1 | MCP1700T-3V3 SOT89 | SOT89 | U1_Alt1 |
| 1 | TXB0104D | TXB0104D | U2 |
| 1 | TSOP382 | TSOP382 | U3 |
| 1 | DS3231N | DS3231 | U4 |
| 1 | TPS62133 | TPS62132 | U5 |
| 1 | MSGEQ7 | SO8E | U6 |
| 1 | MSGEQ7_DIP | DIP-8__300 | U6_Alt1 |
| 1 | ATMEGA328 | TQFP32 | U7 |
| 1 | MMBT2222 | SOT23-3-NPN | Q1 |
| 1 | 16MHz | Xtal_SMD3 | X1 |
| 1 | ISP | ISP | J1 |
| 1 | FTDI | PIN_ARRAY-6X1 | J2 |
| 1 | rtcBOB/CD | rtcBOB | J3 |
| 1 | SW_EXT | PIN_ARRAY_3x1 | J4 |
| 1 | JACK_3.5MM_5PIN | Jack_3.5mm_SJ1-3513 | J5 |
| 1 | STACK_L | STACK-L | J6 |
| 1 | V_IN | bornier2 | J7 |
| 2 | 5V_EXT | bornier2 | J8, J9 |
| 1 | PWR_1 | pin_strip_2 | J10 |
Show 42 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SER_1 | pin_strip_2 | J11 |
| 1 | PAR_1 | PIN_ARRAY_4x1 | J12 |
| 1 | PAR_2 | SIL-8 | J13 |
| 1 | PAR_3 | PIN_ARRAY_4x1 | J14 |
| 1 | SER_2 | pin_strip_2 | J15 |
| 1 | PWR_2 | pin_strip_2 | J16 |
| 1 | STACK_R | STACK-R | J17 |
| 1 | EqIn_EXT | PIN_ARRAY_3x1 | J18 |
| 1 | V_IN | JACK_ALIM | P1 |
| 1 | EQ2<>SPK | PIN_ARRAY_3x1 | P2 |
| 1 | EQ_SH | PIN_ARRAY-6X1 | P3 |
| 3 | I/O | O%3a | B2, B3, B15 |
| 1 | BATT_RTC | CR2032 | BT1 |
| 12 | SCREW | vite_3mm | SC1, SC2, SC3, SC4, SC5, SC6, SC7, SC8 +4 |
| 1 | SD_CARD_MICRO | SD_Micro_seeed | SD1 |
| 1 | EN_RTC | ShortLink | SL1 |
| 1 | SPEAKER | Speaker_2 | SP1 |
| 1 | SW_RST | SW-PB | SW1 |
| 1 | SW_UP | SW-PB | SW2 |
| 1 | SW_DN | SW-PB | SW3 |
| 1 | SW_OK | SW-PB | SW4 |
| 1 | SW_LT | SW-PB | SW5 |
| 1 | SW_RT | SW-PB | SW6 |
| 1 | LED | d_0805 | D1 |
| 1 | BRIDGE | Bridge | D2 |
| 1 | 2u2H,3.0A | Inductor_SMD3 | L1 |
| 10 | 100nF | c_0805 | C1, C6, C7, C9, C13, C16, C17, C21 +2 |
| 2 | 1uF | c_0805 | C2, C5 |
| 1 | 220nF | c_0805 | C3 |
| 1 | 10uF X7R | c_1206 | C4 |
| 1 | 3.3nF | c_0805 | C8 |
| 2 | 22pF | c_0805 | C10, C11 |
| 4 | 22uF X7R | c_1210 | C12, C24, C25, C26 |
| 2 | 10nF | c_0805 | C14, C18 |
| 1 | 33pF | c_0603 | C15 |
| 2 | 100uF | C_ELCO_SMD | C19, C20 |
| 9 | 10k | r_0805 | R1, R2, R7, R9, R11, R12, R13, R14 +1 |
| 1 | 100E | r_0805 | R3 |
| 1 | 100k | r_0805 | R4 |
| 2 | 1k5 | r_0805 | R5, R16 |
| 2 | 25k | Pot-Var2 | R6, R10 |
| 1 | 200k | r_0805 | R8 |
TiNA design files
The KiCad project lives in the wyolum/TiNA repository on GitHub; these links point at the commit this page was built from.
TiNA: common questions
What microcontroller does the TiNA use?
The TiNA is built around the ATMEGA328, from the AVR/Arduino family.
How big is the TiNA PCB?
The TiNA measures 121.9 × 99.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TiNA?
102 components, from 62 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TiNA design files?
From the wyolum/TiNA repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the TiNA design in my own project?
The repository has no license, so all rights stay with wyolum. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TiNA without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in TiNA
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k