15 open source boards using the DS3231N
Real designs built with the DS3231N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Alamode
wyolum
85.1 × 55.9 mm75 partsNo license35Wyostat
wyolum
99.1 × 99.1 mm84 parts2LNo license7AVR/Arduino
Nixie clock
njeff
148.1 × 37.1 mm29 parts2LNo license7ESP32
KlokTHREEjr
wyolum
162.6 × 194.3 mm273 parts2LNo license5ESP32
ClockIOT
wyolum
162.6 × 194.3 mm282 parts2LMIT4AVR/Arduino
ClockFOUR
wyolum
210 × 228 mm431 parts2LMIT3AVR/Arduino
MmM
wyolum
99 × 80 mm162 parts2LNo license2AVR/Arduino
TiNA - Controller for TiM
wyolum
190 × 152 mm147 parts2LNo license1AVR/Arduino
Celeste
wyolum
80 × 80 mm45 parts2LMIT1AVR/Arduino
UControl v3
wyolum
190 × 152 mm147 parts2LMIT0AVR/Arduino
TiNA-append
wyolum
190 × 152 mm135 parts2LNo license0TI MSP430/CC
KiCad
JLimbocker
176.5 × 82.6 mm80 parts2LNo license0ESP32
K3jr controller
wyolum
161.3 × 40.6 mm70 parts2LNo license5AVR/Arduino
TiNA
wyolum
121.9 × 99.8 mm102 parts2LNo license0AVR/Arduino
ALaMode v3
wyolum
85.1 × 55.9 mm76 partsNo license1
How designs wire the DS3231N
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the DS3231N connects to, and the resistors, capacitors and other passives placed on it.
- Pin 14 has a capacitor to GND on 11 of 12 designs, most often 100 nF.
- Pin 15 has a pull-up to 5V on 11 of 12 designs, most often 10 kΩ (then 4.7 kΩ).
- Pin 16 has a pull-up to 5V on 11 of 12 designs, most often 10 kΩ (then 4.7 kΩ).
- Pin 5 is tied to GND on 12 of 12 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 83% · not connected 17% |
|
| Pin 2 | Connected to: 5V 92% | — |
| Pin 3 | Connected to: The microcontroller 33%, a connector 25% |
|
| Pin 5 | Connected to: GND 100% | — |
| Pin 6 | Connected to: GND 100% | — |
| Pin 7 | Connected to: GND 100% | — |
| Pin 8 | Connected to: GND 100% | — |
| Pin 9 | Connected to: GND 100% | — |
| Pin 10 | Connected to: GND 100% | — |
| Pin 11 | Connected to: GND 100% | — |
| Pin 12 | Connected to: GND 100% | — |
| Pin 13 | Connected to: GND 100% | — |
| Pin 14 | Connected to: Signal 100% |
|
| Pin 15 | Connected to: The microcontroller 92%, a connector 58% |
|
| Pin 16 | Connected to: The microcontroller 92%, a connector 58% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Alamode by wyolum, Nixie clock by njeff, Wyostat by wyolum and KlokTHREEjr by wyolum.
The DS3231N in open source designs
The gallery holds 15 open source boards using the DS3231N from 12 GitHub repositories; a typical one measures about 161.3 × 99.1 mm and carries around 102 components.
100% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.
The most starred is Alamode by wyolum.
Parts used alongside the DS3231N
Microcontrollers on boards using the DS3231N
What boards using the DS3231N are built for
DS3231N: common questions
Where can I find a DS3231N reference design?
Each of the 15 boards on this page is a real design using the DS3231N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the DS3231N pin 14 connected?
Pin 14 has a capacitor to GND on 11 of 12 designs, most often 100 nF. Counted from the KiCad layouts of 12 open source designs using the DS3231N.
What pull-up resistor is used on the DS3231N pin 15?
Pin 15 has a pull-up to 5V on 11 of 12 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 12 open source designs using the DS3231N.
What pull-up resistor is used on the DS3231N pin 16?
Pin 16 has a pull-up to 5V on 11 of 12 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 12 open source designs using the DS3231N.
What parts are used alongside the DS3231N?
The ADXL345, TXB0104D, ATMEGA328-AU-ND, BEAGLEBONE and CAT24C256 appear in the most repositories here.
Which microcontrollers do boards using the DS3231N use?
Most are built on AVR/Arduino (10), ESP32 (3) and TI MSP430/CC (1).
How big is a typical board using the DS3231N?
The median is 161.3 × 99.1 mm, and 100% are two-layer designs.
What is the most popular open source board using the DS3231N?
By GitHub stars, Alamode by wyolum, with 35 stars.
Can I simulate one of these boards using the DS3231N before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.