RotaryPositionEncoder
X-Green·RotaryPositionEncoder·Hardware/RotaryPositionEncoder_RP2040.kicad_pcb
About the RotaryPositionEncoder PCB
RotaryPositionEncoder is an open source RP2040/RP2350 PCB design by X-Green, published on GitHub. It is a 4-layer board measuring 33 × 33 mm, with 65 components from 34 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the AS5047P, M24C02-RMN, TJA1042T, RT9013-33GB and MAX14783ExS. By type, the board carries 24 capacitors, 18 resistors, 7 ICs, 7 connectors, 5 diodes and 3 jumpers.
Main components on the RotaryPositionEncoder
RotaryPositionEncoder bill of materials (BOM)
65 components, 34 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AS5047P | TSSOP-14_4.4x5mm_P0.65mm | U1 |
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | M24C02-RMN | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | TJA1042T | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | RT9013-33GB | TSOT-23-5 | U6 |
| 1 | MAX14783ExS | SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | W25Q32JVZP | WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U8 |
| 1 | Crystal_GND2 | Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm_HandSoldering | Y2 |
| 1 | Conn_ABI | PinHeader_1x04_P1.27mm_Vertical | J1 |
| 1 | Conn_UVW | PinHeader_1x04_P1.27mm_Vertical | J2 |
| 1 | Conn_USB | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J3 |
| 1 | Conn_5VDC | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 2 | Conn_CAN | JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J7, J8 |
| 1 | Conn_01x04_MountingPin | Molex_PicoBlade_53261-0471_1x04-1MP_P1.25mm_Horizontal | J9 |
| 1 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 2 | Jumper_2_Open | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP2, JP3 |
| 3 | LED | LED_0603_1608Metric | D1, D2, D3 |
| 2 | NUP2105L | SOT-23 | D4, D7 |
| 16 | 100nF | C_0603_1608Metric | C1, C4, C5, C6, C7, C8, C9, C10 +8 |
| 1 | 2.2uF | C_0603_1608Metric | C2 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1uF | C_0603_1608Metric | C3, C26 |
| 2 | 2.2uF | C_0805_2012Metric | C12, C15 |
| 1 | 10uF | C_1206_3216Metric | C18 |
| 1 | 10nF | C_0603_1608Metric | C19 |
| 1 | 2.2uF | C_1206_3216Metric | C20 |
| 1 | DNF | R_0603_1608Metric | R1 |
| 5 | 4.7K | R_0603_1608Metric | R2, R3, R4, R10, R11 |
| 1 | 470R | R_0603_1608Metric | R5 |
| 2 | 27.4R | R_0603_1608Metric | R6, R7 |
| 2 | 1K | R_0603_1608Metric | R8, R16 |
| 2 | 10K | R_0603_1608Metric | R9, R15 |
| 1 | 33R | R_0603_1608Metric | R18 |
| 2 | 536R | R_0603_1608Metric | R19, R20 |
| 2 | 120R | R_0603_1608Metric | R21, R22 |
RotaryPositionEncoder design files
The KiCad project lives in the X-Green/RotaryPositionEncoder repository on GitHub; these links point at the commit this page was built from.
RotaryPositionEncoder: common questions
What microcontroller does the RotaryPositionEncoder use?
The RotaryPositionEncoder is built around the RP2040, from the RP2040/RP2350 family.
How big is the RotaryPositionEncoder PCB?
The RotaryPositionEncoder measures 33 × 33 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the RotaryPositionEncoder?
65 components, from 34 distinct parts. The full bill of materials is listed on this page.
Where can I download the RotaryPositionEncoder design files?
From the X-Green/RotaryPositionEncoder repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RotaryPositionEncoder design in my own project?
The repository has no license, so all rights stay with X-Green. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RotaryPositionEncoder without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k