5 open source boards using the AS5047P
Real designs built with the AS5047P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Stm8-bootloader extended
niksrajendra
40 × 60 mm131 parts2LNo license0RP2040/RP2350
RotaryPositionEncoder
X-Green
33 × 33 mm65 parts4LNo license0Bldc motor encoder
azmat-bilal
20 × 20 mm6 parts2LMIT112Wheel Motor Driver
SSL-A-Team
45 × 46 mm87 parts6LMIT6AS5047P Encoder
luhbots
22 × 23.8 mm3 parts2LNo license2
How designs wire the AS5047P
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the AS5047P connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
- The VDD3V3 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
- The TEST pin is tied to GND on 4 of 5 designs.
- The W/PWM pin is left unconnected on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| TESTpin 5 | Connected to: GND 80% · not connected 20% | — |
| W/PWMpin 8 | Connected to: Not connected 80% · a signal 20% | — |
| Vpin 9 | Connected to: Not connected 80% · a signal 20% | — |
| Upin 10 | Connected to: Not connected 80% · a signal 20% | — |
| VDDpin 11 | Connected to: 3.3V 100% |
|
| VDD3V3pin 12 | Connected to: 3.3V 80% · a signal 20% |
|
| GNDpin 13 | Connected to: GND 100% | — |
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bldc motor encoder by azmat-bilal, Wheel Motor Driver by SSL-A-Team, AS5047P Encoder by luhbots and Stm8-bootloader extended by niksrajendra.
The AS5047P in open source designs
The gallery holds 5 open source boards using the AS5047P from 5 GitHub repositories; a typical one measures about 33 × 33 mm and carries around 65 components.
60% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Bldc motor encoder by azmat-bilal.
Microcontrollers on boards using the AS5047P
What boards using the AS5047P are built for
AS5047P: common questions
Where can I find a AS5047P reference design?
Each of the 5 boards on this page is a real design using the AS5047P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the AS5047P VDD pin?
The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the AS5047P.
What decoupling capacitors do designs use on the AS5047P VDD3V3 pin?
The VDD3V3 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the AS5047P.
How is the AS5047P TEST pin connected?
The TEST pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the AS5047P.
Which microcontrollers do boards using the AS5047P use?
Most are built on RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the AS5047P?
The median is 33 × 33 mm, and 60% are two-layer designs.
What is the most popular open source board using the AS5047P?
By GitHub stars, Bldc motor encoder by azmat-bilal, with 112 stars.
Can I simulate one of these boards using the AS5047P before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.