Pillex main

xPiTi·pillex-main·PCB/PillDispenser.kicad_pcb

Pillex main PCB layout, top view — open source AVR/Arduino board by xPiTi

About the Pillex main PCB

Pillex main is an open source AVR/Arduino PCB design by xPiTi, published on GitHub. It is a 2-layer board measuring 234 × 117 mm, with 209 components from 59 distinct parts.

Its main chip is the ATmega328PB-A, from the AVR/Arduino family. Other key parts include the CH340G, TPM8837E-DF4R, LM393, TCA9555PWR and M24C02-WMN. By type, the board carries 67 resistors, 47 capacitors, 19 connectors, 17 diodes, 12 ICs and 10 transistors.

From the project

Submission files for MSc project - Pillex - pill dispensing device

Submission files for MSc project - Pillex - pill dispensing device

Read more at: https://paw3l.com/projects/pillex/

Main components on the Pillex main

Pillex main bill of materials (BOM)

209 components, 59 distinct parts.

QtyPartRefs
1
CH340G
U1
1
ATmega328PB-A
U2
4
TPM8837E-DF4R
U3, U4, U5, U6
2
LM393
U7, U8
1
TCA9555PWR
U9
1
M24C02-WMN
U10
1
TPS56637
U11
1
MP2338
U12
6
IRLML0030
Q1, Q2, Q8, Q9, Q10, Q11
4
SFH309
Q4, Q5, Q6, Q7
1
Crystal_GND24
Y1
3
Conn_01x04_Pin
J1, J13, J14
1
Conn_01x08_Socket
J2
4
Conn_01x08_Socket
J3, J4, J5, J6
3
Conn_01x05_Pin
J7, J16, J19
1
Conn_02x03_Odd_Even
J8
1
Barrel_Jack_MountingPin
J9
2
Screw_Terminal_01x02
J10, J12
1
USB_C_Receptacle_USB2.0_16P
J11
2
Conn_01x08_Pin
J15, J18
Show 39 more
QtyPartRefs
1
Conn_01x08_MountingPin
J17
4
Conn_01x08_Pin
CJ1, CJ2, CJ3, CJ4
1
1A
F1
8
1nF
M_C1, M_C2, M_C3, M_C4, M_C5, M_C6, M_C7, M_C8
4
0R
M_R1, M_R2, M_R3, M_R4
4
100k
RV1, RV2, RV3, RV4
4
SW_Push
SW1, SW2, SW3, SW4
1
VAL**
mouse-bite-2mm-slot
4
LED
M_D1, M_D2, M_D3, M_D4
13
DESD5V0S1BA-7
D1, D2, D7, D8, D9, D10, D11, D12 +5
4
LED
D3, D4, D5, D6
1
22uH
L1
1
2.2uH
L2
1
2.2uH
L3
2
2.2uH
L4, L6
1
6.8uH
L5
1
1uF
C1
29
100nF
C2, C3, C4, C9, C10, C11, C12, C14 +21
9
10uF
C5, C6, C7, C8, C13, C24, C28, C42 +1
1
100uF
C15
1
100pF
C22
5
22uF
C25, C26, C27, C39, C40
1
470pF
C38
10
10k
R1, R2, R3, R4, R22, R23, R24, R25 +2
8
1k
R5, R33, R34, R35, R38, R39, R40, R41
12
100k
R6, R7, R8, R9, R42, R53, R62, R63 +4
2
4.7k
R10, R11
16
0R
R12, R13, R14, R15, R16, R17, R30, R31 +8
8
200R
R18, R19, R20, R21, R26, R27, R28, R29
2
5.1k
R36, R37
1
20k
R43
1
73.2k
R44
1
49.9R
R47
1
169k
R48
1
36.1k
R49
1
51k
R55
1
9.09k
R56
1
191k
R57
1
49.9k
R58

Pillex main design files

The KiCad project lives in the xPiTi/pillex-main repository on GitHub; these links point at the commit this page was built from.

Pillex main: common questions

What microcontroller does the Pillex main use?

The Pillex main is built around the ATmega328PB-A, from the AVR/Arduino family.

How big is the Pillex main PCB?

The Pillex main measures 234 × 117 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pillex main?

209 components, from 59 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pillex main design files?

From the xPiTi/pillex-main repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pillex main design in my own project?

The repository has no license, so all rights stay with xPiTi. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pillex main without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards