TapPad

Yash-Takhtani·TapPad·PCB/tap pad.kicad_pcb

TapPad PCB layout, top view — open source ESP32 board by Yash-Takhtani

About the TapPad PCB

TapPad is an open source ESP32 PCB design by Yash-Takhtani, published on GitHub. It is a 2-layer board measuring 98.5 × 41.5 mm, with 9 components from 5 distinct parts.

Its main chip is the XIAO-ESP32-C3-DIP, from the ESP32 family. Other key parts include the ER_OLEDM0.91_1x-I2C. By type, the board carries 6 switches, 2 ICs and 1 diode.

It belongs with the displays & leds and keyboards designs in this gallery.

From the project

TapPad speeds up annoying tasks. You can use the keys to assign custom macros on your device or use the rotary switch to control media. It also has a customizable 0.91 inch OLED display and a LED indicator.

To be purchased with the grant - - PCB (from external PCB manufacturer like JLCPCB) - 3D printed case and rotary cap from Printing Legion

During the build I slightly misplaced the oled display due to which i had to modify the display cutout with my coldering iron. It kinda left burnt marks. I have added extra clearances to the CAD.

TapPad, from the project README
From the project README

Main components on the TapPad

TapPad bill of materials (BOM)

9 components, 5 distinct parts.

QtyPartRefs
1
XIAO-ESP32-C3-DIP
U2
1
ER_OLEDM0.91_1x-I2C
U3
1
RotaryEncoder_Switch
SW10
5
SW_Push
SW12, SW13, SW14, SW15, SW16
1
WS2812B
D1

TapPad design files

The KiCad project lives in the Yash-Takhtani/TapPad repository on GitHub; these links point at the commit this page was built from.

TapPad: common questions

What microcontroller does the TapPad use?

The TapPad is built around the XIAO-ESP32-C3-DIP, from the ESP32 family.

How big is the TapPad PCB?

The TapPad measures 98.5 × 41.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TapPad?

9 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the TapPad design files?

From the Yash-Takhtani/TapPad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the TapPad design in my own project?

The repository has no license, so all rights stay with Yash-Takhtani. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TapPad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards