Dittobie

ye8um·dittobie·hardware/dittobie.kicad_pcb

Dittobie PCB layout, top view — open source ESP32 board by ye8um

About the Dittobie PCB

Dittobie is an open source ESP32 PCB design by ye8um, published on GitHub. It is a 2-layer board measuring 113.5 × 92.6 mm, with 6 components from 5 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors and 2 switches.

It belongs with the displays & leds and sensors designs in this gallery.

From the project

Dittobie is an interactive digital desk pet inspired by Ditto from Pokémon. Built using the Seeed Studio XIAO ESP32-C3, Dittobie combines embedded programming, electronics, custom PCB design, pixel art, and physical interaction into a small desktop companion.

Dittobie is an interactive digital desk pet inspired by Ditto from Pokémon. Built using the Seeed Studio XIAO ESP32-C3, Dittobie combines embedded programming, electronics, custom PCB design, pixel art, and physical interaction into a small desktop companion.

The purpose of Dittobie is to create a digital pet that feels more interactive than a character displayed on a screen. Instead of relying entirely on a computer or touchscreen, users can interact with Dittobie through physical buttons and motion-based controls.

Dittobie, from the project README
From the project README

Main components on the Dittobie

Dittobie bill of materials (BOM)

6 components, 5 distinct parts.

QtyPartRefs
1
DHT11
U1
1
XIAO-ESP32-C3-SMD
U2
1
Conn_01x04_Pin
J1
1
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2

Dittobie design files

The KiCad project lives in the ye8um/dittobie repository on GitHub; these links point at the commit this page was built from.

Dittobie: common questions

What microcontroller does the Dittobie use?

The Dittobie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Dittobie PCB?

The Dittobie measures 113.5 × 92.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Dittobie?

6 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Dittobie design files?

From the ye8um/dittobie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Dittobie design in my own project?

The repository has no license, so all rights stay with ye8um. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Dittobie without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards