Table display
yeyintlwin·kicad-board-design·examples/table-display/table-display.kicad_pcb
About the Table display PCB
Table display is an open source ESP32 PCB design by yeyintlwin, published on GitHub under the MIT license. It is a 2-layer board measuring 59 × 29 mm, with 42 components from 29 distinct parts.
Its main chip is the XIAO ESP32-C3, from the ESP32 family. By type, the board carries 15 capacitors, 15 resistors, 5 transistors, 3 diodes, 1 IC and 1 connector.
It belongs with the displays & leds designs in this gallery.
From the project
Design a two-layer KiCad PCB entirely from Python scripts - no GUI step, no commercial autorouter
Or clone it and point KiCad's Python at examples/base-station/scripts/. The method, the shared library and both boards are in this one repository.
A method for designing KiCad PCBs entirely from Python scripts — no interactive editing, and no commercial autorouter. Symbols, footprints, schematic, placement, copper and ground pours are all generated. The board on disk is a pure function of the scripts, so it can be re-run from nothing, and a change shows up in git as only that change.
Main components on the Table display
Table display bill of materials (BOM)
42 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO ESP32-C3 XIAO ESP32-C3 (USER SOLDER / DNP) Seeed Studio | MCU_Seeed_ESP32C3 | U1 |
| 1 | AO3401A AO3401A EPD HIGH-SIDE TECH PUBLIC | SOT-23 | Q1 |
| 1 | 2N7002 2N7002 EPD PULL-DOWN JF | SOT-23 | Q2 |
| 1 | AO3401A AO3401A SENSE HIGH-SIDE TECH PUBLIC | SOT-23 | Q3 |
| 1 | 2N7002 2N7002 SENSE PULL-DOWN JF | SOT-23 | Q4 |
| 1 | AO3402 AO3402 N-MOS BOOST Alpha & Omega Semiconductor | SOT-23 | Q5 |
| 1 | FH34SRJ-24S-0.5SH(50) E0213A179 / FH34SRJ-24S-0.5SH Hirose Electric | Hirose_FH34SRJ-24S-0.5SH_1x24-2MP_P0.50mm_Horizontal | J1 |
| 1 | PROTECTED 1-CELL LIPO SOLDER PADS | PinHeader_1x02_P2.54mm_Vertical | BAT1 |
| 3 | B5819WS JSMSEMI | D_SOD-323 | D1, D2, D3 |
| 1 | SWPA3015S100MT 10uH / 770mA MIN Sunlord | L_Sunlord_SWPA3015S | L1 |
| 1 | 0603B104K500NT 100 nF / 50 V X7R (BAT) FH (Guangdong Fenghua Advanced Tech) | C_0603_1608Metric | C1 |
| 1 | CL10A106KP8NNNC 10 uF / 10 V X5R EPD Samsung Electro-Mechanics | C_0603_1608Metric | C2 |
| 1 | 0603B104K500NT 100 nF / 50 V X7R EPD FH (Guangdong Fenghua Advanced Tech) | C_0603_1608Metric | C3 |
| 1 | 0603B104K500NT 100 nF / 50 V X7R ADC FH (Guangdong Fenghua Advanced Tech) | C_0603_1608Metric | C4 |
| 1 | 0603B104K500NT 100nF FH (Guangdong Fenghua Advanced Tech) | C_0603_1608Metric | C5 |
| 7 | 0603B105K250 1uF/25V Walsin Tech Corp | C_0603_1608Metric | C6, C7, C8, C9, C10, C11, C12 |
| 1 | 0603B105K250 1uF/25V FLYING Walsin Tech Corp | C_0603_1608Metric | C13 |
| 1 | 0603B105K250 1uF/25V VGL Walsin Tech Corp | C_0603_1608Metric | C14 |
| 1 | 0603B105K250 1uF/25V VGH Walsin Tech Corp | C_0603_1608Metric | C15 |
| 1 | 0603 5% 1M 1 Mohm Q1 GATE PULL-UP VO | R_0603_1608Metric | R1 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0603 5% 1M 1 Mohm Q2 GATE PULL-DOWN VO | R_0603_1608Metric | R2 |
| 1 | 0603 5% 1M 1 Mohm Q3 GATE PULL-UP VO | R_0603_1608Metric | R3 |
| 1 | 0603 5% 1M 1 Mohm Q4 GATE PULL-DOWN VO | R_0603_1608Metric | R4 |
| 1 | 0603 5% 1M 1 Mohm BAT DIVIDER TOP VO | R_0603_1608Metric | R5 |
| 1 | 0603WAF3303T5E 330 kohm BAT DIVIDER BOTTOM UNI-ROYAL | R_0603_1608Metric | R6 |
| 6 | RCA03100RFLF 100R Royal Ohm | R_0603_1608Metric | R7, R8, R9, R10, R11, R12 |
| 1 | 0603WAF5101T5E 5.1k 4-WIRE UNI-ROYAL | R_0603_1608Metric | R13 |
| 1 | 0603WAF1003T5E 100k RESE BIAS UNI-ROYAL | R_0603_1608Metric | R14 |
| 1 | FRC0603F2R20TS 2.2R SENSE FH (Guangdong Fenghua) | R_0603_1608Metric | R15 |
Table display design files
The KiCad project lives in the yeyintlwin/kicad-board-design repository on GitHub; these links point at the commit this page was built from.
Table display: common questions
What microcontroller does the Table display use?
The Table display is built around the XIAO ESP32-C3, from the ESP32 family.
How big is the Table display PCB?
The Table display measures 59 × 29 mm, has 2 copper layers and is 1 mm thick.
How many components are on the Table display?
42 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Table display design files?
From the yeyintlwin/kicad-board-design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Table display design in my own project?
Yes, under the terms of its MIT license, which yeyintlwin chose for the repository.
Can I test firmware for the Table display without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in kicad-board-design
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k