Macro devboard

YingK8·ESP32-BLE-Macro-Pad·PCB/macro devboard.kicad_pcb

Macro devboard PCB layout, top view — open source AVR/Arduino board by YingK8

About the Macro devboard PCB

Macro devboard is an open source AVR/Arduino PCB design by YingK8, published on GitHub. It is a 2-layer board measuring 243.1 × 137.4 mm, with 41 components from 16 distinct parts.

Its main chip is the ATmega32U4-A, from the AVR/Arduino family. By type, the board carries 10 diodes, 8 switches, 7 test points, 7 resistors, 5 capacitors and 2 connectors.

It belongs with the keyboards, iot & wireless and dev boards & breakouts designs in this gallery.

From the project

A compact, programmable macropad with Bluetooth connectivity, featuring 6 mechanical keys and a rotary encoder for media control.

A compact, programmable macropad with Bluetooth connectivity, featuring 6 mechanical keys and a rotary encoder for media control.

- 6-key mechanical switch matrix - Rotary encoder for volume/scroll control - Bluetooth HID (no drivers required) - Supports both keyboard and media controls - Customizable key mappings

1. Wire components according to pinout table 2. Install Arduino IDE with ESP32 support 3. Install required libraries: - ESP32 BLE Arduino - RotaryEncoder 4. Upload firmware to ESP32

Main components on the Macro devboard

Macro devboard bill of materials (BOM)

41 components, 16 distinct parts.

QtyPartRefs
1
ATmega32U4-A
U2
1
ABM8-16.000MHz-D1X-T
Y2
1
12402012E212A
J1
1
Conn_02x13_Counter_Clockwise
J3
1
PEC12R-4225F-S0024
S1
6
MX_SW_HS
SW1, SW2, SW6, SW7, SW8, SW9
1
RST
SW3
7
TestPoint
TP1, TP2, TP3, TP4, TP5, TP6, TP7
3
LED
D1, D9, D11
7
1N4148WT
D2, D3, D4, D5, D6, D7, D8
3
1uF
C9, C11, C12
2
18pF
C13, C14
3
100
R1, R2, R11
1
4.7k
R3
2
22
R4, R5
1
10k
R12

Macro devboard design files

The KiCad project lives in the YingK8/ESP32-BLE-Macro-Pad repository on GitHub; these links point at the commit this page was built from.

Macro devboard: common questions

What microcontroller does the Macro devboard use?

The Macro devboard is built around the ATmega32U4-A, from the AVR/Arduino family.

How big is the Macro devboard PCB?

The Macro devboard measures 243.1 × 137.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Macro devboard?

41 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Macro devboard design files?

From the YingK8/ESP32-BLE-Macro-Pad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Macro devboard design in my own project?

The repository has no license, so all rights stay with YingK8. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Macro devboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in ESP32-BLE-Macro-Pad

Similar boards