Macro devboard quarq

YingK8·ESP32-BLE-Macro-Pad·PCB/macro devboard quarq.kicad_pcb

Macro devboard quarq PCB layout, top view — open source Nordic nRF board by YingK8

About the Macro devboard quarq PCB

Macro devboard quarq is an open source Nordic nRF PCB design by YingK8, published on GitHub. It is a 2-layer board measuring 59.4 × 71.7 mm, with 56 components from 29 distinct parts.

Its main chip is the nRF52840, from the Nordic nRF family. Other key parts include the USBLC6-2SC6. By type, the board carries 19 capacitors, 10 diodes, 8 switches, 7 resistors, 3 inductors and 2 ICs.

It belongs with the iot & wireless, keyboards and dev boards & breakouts designs in this gallery.

From the project

A compact, programmable macropad with Bluetooth connectivity, featuring 6 mechanical keys and a rotary encoder for media control.

A compact, programmable macropad with Bluetooth connectivity, featuring 6 mechanical keys and a rotary encoder for media control.

- 6-key mechanical switch matrix - Rotary encoder for volume/scroll control - Bluetooth HID (no drivers required) - Supports both keyboard and media controls - Customizable key mappings

1. Wire components according to pinout table 2. Install Arduino IDE with ESP32 support 3. Install required libraries: - ESP32 BLE Arduino - RotaryEncoder 4. Upload firmware to ESP32

Main components on the Macro devboard quarq

Macro devboard quarq bill of materials (BOM)

56 components, 29 distinct parts.

QtyPartRefs
1
nRF52840
U1
1
USBLC6-2SC6
U3
1
ECS-320-8-37B-CKY-TR
Y3
1
12402012E212A
J1
1
Conn_02x13_Counter_Clockwise
J3
1
2450AT14A0100001T
E1
1
PEC12R-4225F-S0024
S1
6
MX_SW_HS
SW1, SW2, SW6, SW7, SW8, SW9
1
RST
SW4
1
7.5nH
Z1
1
DNF
Z2
1
0.6pF
Z3
7
1N4148WT
D2, D3, D4, D5, D6, D7, D8
3
LED
D9, D10, D12
1
15nH
L1
1
10uH
L2
1
4.7nH
L3
2
1uF
C16, C27
7
100nF
C17, C19, C20, C21, C22, C30, C32
1
4.7uF
C18
Show 9 more
QtyPartRefs
1
0.8pF
C23
1
0.5pF
C24
3
DNF
C25, C26, C31
1
47nF
C28
1
820pF
C29
2
8pF
C33, C34
2
5.1k
R1, R2
2
22
R4, R5
3
100
R6, R7, R11

Macro devboard quarq design files

The KiCad project lives in the YingK8/ESP32-BLE-Macro-Pad repository on GitHub; these links point at the commit this page was built from.

Macro devboard quarq: common questions

What microcontroller does the Macro devboard quarq use?

The Macro devboard quarq is built around the nRF52840, from the Nordic nRF family.

How big is the Macro devboard quarq PCB?

The Macro devboard quarq measures 59.4 × 71.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Macro devboard quarq?

56 components, from 29 distinct parts. The full bill of materials is listed on this page.

Where can I download the Macro devboard quarq design files?

From the YingK8/ESP32-BLE-Macro-Pad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Macro devboard quarq design in my own project?

The repository has no license, so all rights stay with YingK8. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Macro devboard quarq without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in ESP32-BLE-Macro-Pad

Similar boards