With humiditier
YingK8·ESP32-BLE-Macro-Pad·PCB/with humiditier.kicad_pcb
About the With humiditier PCB
With humiditier is an open source AVR/Arduino PCB design by YingK8, published on GitHub. It is a 2-layer board measuring 89.7 × 114.8 mm, with 43 components from 18 distinct parts.
Its main chip is the ATmega32U4-A, from the AVR/Arduino family. Other key parts include the LM555xM. By type, the board carries 11 diodes, 10 resistors, 8 switches, 7 capacitors, 2 ICs and 2 transistors.
It belongs with the keyboards and iot & wireless designs in this gallery.
From the project
A compact, programmable macropad with Bluetooth connectivity, featuring 6 mechanical keys and a rotary encoder for media control.
A compact, programmable macropad with Bluetooth connectivity, featuring 6 mechanical keys and a rotary encoder for media control.
- 6-key mechanical switch matrix - Rotary encoder for volume/scroll control - Bluetooth HID (no drivers required) - Supports both keyboard and media controls - Customizable key mappings
1. Wire components according to pinout table 2. Install Arduino IDE with ESP32 support 3. Install required libraries: - ESP32 BLE Arduino - RotaryEncoder 4. Upload firmware to ESP32
Main components on the With humiditier
With humiditier bill of materials (BOM)
43 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega32U4-A | TQFP-44_10x10mm_P0.8mm | U2 |
| 1 | LM555xM | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 2 | FMMT491A | TO-92_Inline | Q1, Q2 |
| 1 | 12402012E212A | AMPHENOL_12402012E212A | J1 |
| 2 | Pezo Atomizer | PinHeader_1x02_P2.54mm_Vertical | LS1, LS2 |
| 1 | PEC12R-4225F-S0024 | XDCR_PEC12R-4225F-S0024 | S1 |
| 6 | MX_SW_HS | Kailh_socket_MX | SW1, SW2, SW6, SW7, SW8, SW9 |
| 1 | RST | SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW3 |
| 7 | 1N4148WT | D_SOD-323F | D2, D3, D4, D5, D6, D7, D8 |
| 4 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D9, D10, D11, D12 |
| 1 | 0.01uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 47uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 5 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C11, C12, C13, C14 |
| 2 | 1k | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R2, R6 |
| 1 | 4.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 2 | 22 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 4 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R11, R13 |
| 1 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
With humiditier design files
The KiCad project lives in the YingK8/ESP32-BLE-Macro-Pad repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/with humiditier.kicad_pcb
- SchematicPCB/with humiditier.kicad_sch
With humiditier: common questions
What microcontroller does the With humiditier use?
The With humiditier is built around the ATmega32U4-A, from the AVR/Arduino family.
How big is the With humiditier PCB?
The With humiditier measures 89.7 × 114.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the With humiditier?
43 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the With humiditier design files?
From the YingK8/ESP32-BLE-Macro-Pad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the With humiditier design in my own project?
The repository has no license, so all rights stay with YingK8. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the With humiditier without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in ESP32-BLE-Macro-Pad
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k