Macro devboard ESP32
YingK8·ESP32-BLE-Macro-Pad·PCB/macro devboard ESP32.kicad_pcb
About the Macro devboard ESP32 PCB
Macro devboard ESP32 is an open source ESP32 PCB design by YingK8, published on GitHub. It is a 4-layer board measuring 65.6 × 57.2 mm, with 46 components from 23 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the MCP73831T-2ACI/OT, USBLC6-2SC6 and XC6210B332MR. By type, the board carries 11 diodes, 11 resistors, 8 switches, 8 capacitors, 4 ICs and 3 connectors.
It belongs with the iot & wireless, keyboards and dev boards & breakouts designs in this gallery.
From the project
A compact, programmable macropad with Bluetooth connectivity, featuring 6 mechanical keys and a rotary encoder for media control.
A compact, programmable macropad with Bluetooth connectivity, featuring 6 mechanical keys and a rotary encoder for media control.
- 6-key mechanical switch matrix - Rotary encoder for volume/scroll control - Bluetooth HID (no drivers required) - Supports both keyboard and media controls - Customizable key mappings
1. Wire components according to pinout table 2. Install Arduino IDE with ESP32 support 3. Install required libraries: - ESP32 BLE Arduino - RotaryEncoder 4. Upload firmware to ESP32
Main components on the Macro devboard ESP32
Macro devboard ESP32 bill of materials (BOM)
46 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U1 |
| 1 | MCP73831T-2ACI/OT MCP73831T-2ACI_OT | SOT95P280X145-5N | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6_Handsoldering | U3 |
| 1 | XC6210B332MR | SC-74A-5_1.55x2.9mm_P0.95mm | U4 |
| 1 | BSS84LT1G | TSOT-23_HandSoldering | Q1 |
| 1 | 12402012E212A | AMPHENOL_12402012E212A | J1 |
| 1 | Conn_02x04_Odd_Even | PinSocket_2x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x02_Pin | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J4 |
| 1 | PEC12R-4225F-S0024 | XDCR_PEC12R-4225F-S0024 | S1 |
| 5 | MX_SW_HS | Kailh_socket_MX_optional | SW1, SW6, SW7, SW8, SW9 |
| 1 | 1825232-1 | 1825232-1_TEC | SW2 |
| 1 | RST | SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW3 |
| 7 | 1N4148WT | D_SOD-323F | D2, D3, D4, D5, D6, D7, D11 |
| 4 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D8, D9, D10, D12 |
| 3 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C6, C7 |
| 5 | 2.2uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C8, C9 |
| 2 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 22 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 3 | 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R11 |
| 1 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 2.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 1 | PROG | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
Macro devboard ESP32 design files
The KiCad project lives in the YingK8/ESP32-BLE-Macro-Pad repository on GitHub; these links point at the commit this page was built from.
Macro devboard ESP32: common questions
What microcontroller does the Macro devboard ESP32 use?
The Macro devboard ESP32 is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the Macro devboard ESP32 PCB?
The Macro devboard ESP32 measures 65.6 × 57.2 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Macro devboard ESP32?
46 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Macro devboard ESP32 design files?
From the YingK8/ESP32-BLE-Macro-Pad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Macro devboard ESP32 design in my own project?
The repository has no license, so all rights stay with YingK8. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Macro devboard ESP32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in ESP32-BLE-Macro-Pad
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k