ESP32C6-DEMO-BOARD

yogith-mr·ESP32C6-DEMO-BOARD·pcb/ESP32-C6-DEMOBOARD.kicad_pcb

ESP32C6-DEMO-BOARD layout, top view — open source ESP32 board by yogith-mr

About the ESP32C6-DEMO-BOARD

ESP32C6-DEMO-BOARD is an open source ESP32 PCB design by yogith-mr, published on GitHub. It is a 4-layer board measuring 50 × 50 mm, with 38 components from 23 distinct parts.

Its main chip is the ESP32-C6-WROOM-1, from the ESP32 family. Other key parts include the USBLC6-2SC6, LM1117MP-3.3 and HDC3022QDEJRQ1. By type, the board carries 11 resistors, 8 capacitors, 6 diodes, 4 ICs, 4 connectors and 3 switches.

It belongs with the iot & wireless and dev boards & breakouts designs in this gallery.

From the project

Custom ESP32-C6 development board designed using KiCad, including schematic capture and PCB layout. Focused on embedded systems and IoT applications with proper routing, power design, and signal integrity.

- schematic/ → KiCad schematic files - pcb/ → PCB layout files - bom/ → Bill of Materials - images/ → Design screenshots - docs/ → Additional documentation (optional)

📧 mryogith@gmail.com 🔗 LinkedIn: https://www.linkedin.com/in/yogith-gowda-07b594296

Main components on the ESP32C6-DEMO-BOARD

ESP32C6-DEMO-BOARD bill of materials (BOM)

38 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USBLC6-2SC6
U1
1
ESP32-C6-WROOM-1
U2
1
LM1117MP-3.3
U3
1
HDC3022QDEJRQ1
HDC3022
U4
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
Pin 2X3
J2
1
Pin 2x5
J4
1
CONN_01X04
Conn_01x04
J5
1
Polyfuse
F1
2
SW_SPST
SW1, SW2
1
SW_SPST
SW3
1
1N5817
D1
3
ESD9B3.3
D2, D3, D6
1
GREEN
D4
1
CLV1L-FKB
D5
1
BLM21PG220
FB1
3
10U
10u
C1, C4, C7
3
100N
100n
C2, C3, C8
2
22U
22u
C5, C6
3
10K
10k
R1, R2, R6
Show 3 more
QtyPartRefs
2
5.1K
5.1k
R3, R4
4
1k
R5, R7, R8, R9
2
2.2K
2.2k
R10, R11

ESP32C6-DEMO-BOARD design files

The KiCad project lives in the yogith-mr/ESP32C6-DEMO-BOARD repository on GitHub; these links point at the commit this page was built from.

ESP32C6-DEMO-BOARD: common questions

What microcontroller does the ESP32C6-DEMO-BOARD use?

The ESP32C6-DEMO-BOARD is built around the ESP32-C6-WROOM-1, from the ESP32 family.

How big is the ESP32C6-DEMO-BOARD?

The ESP32C6-DEMO-BOARD measures 50 × 50 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the ESP32C6-DEMO-BOARD?

38 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP32C6-DEMO-BOARD design files?

From the yogith-mr/ESP32C6-DEMO-BOARD repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the ESP32C6-DEMO-BOARD design in my own project?

The repository has no license, so all rights stay with yogith-mr. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP32C6-DEMO-BOARD without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards