Viaduct
YoussefBMK·viaduct
About the Viaduct PCB
Viaduct is an open source ESP32 PCB design by YoussefBMK, published on GitHub. It is a board, with 22 components from 15 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the USBLC6-2SC6, AP2112K-3.3 and BME280. By type, the board carries 7 capacitors, 7 resistors, 4 ICs, 2 switches, 1 connector and 1 diode.
It belongs with the iot & wireless designs in this gallery.
From the project
Hardware project built with SKiDL — Python as the hardware description language — and KiCad 10.
Hardware project built with SKiDL — Python as the hardware description language — and KiCad 10.
viaductv0.py` is the circuit: an ESP32-S3-WROOM-1 with a BME280 on I²C, USB-C power and native USB, an AP2112K-3.3 LDO and a USBLC6-2 ESD array. Every part is a stock KiCad 10 symbol with a stock KiCad 10 footprint, and every pin assignment and component value carries a datasheet or specification citation in a comment next to it.
Main components on the Viaduct
Viaduct bill of materials (BOM)
22 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-666 | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U3 |
| 1 | BME280 | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U4 |
| 1 | USB-C | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | RESET | SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | BOOT | SW_Push_1P1T_NO_CK_KMR2 | SW2 |
| 1 | PWR | LED_0603_1608Metric | D1 |
| 3 | 1uF X5R | C_0603_1608Metric | C1, C2, C5 |
| 1 | 22uF X5R | C_0603_1608Metric | C3 |
| 3 | 100nF X7R | C_0603_1608Metric | C4, C6, C7 |
| 2 | 5.1k | R_0603_1608Metric | R1, R2 |
| 2 | 10k | R_0603_1608Metric | R3, R4 |
| 2 | 4.7k | R_0603_1608Metric | R5, R6 |
| 1 | 1k | R_0603_1608Metric | R7 |
Viaduct design files
The KiCad project lives in the YoussefBMK/viaduct repository on GitHub; these links point at the commit this page was built from.
- Netlistviaduct_v0.net
Viaduct: common questions
What microcontroller does the Viaduct use?
The Viaduct is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How many components are on the Viaduct?
22 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Viaduct design files?
From the YoussefBMK/viaduct repository on GitHub, which has a netlist; the links under Design files point to each one.
Can I use the Viaduct design in my own project?
The repository has no license, so all rights stay with YoussefBMK. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Viaduct without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k