18650-3v3-supply
yvolodym·18650-3v3-supply
About the 18650-3v3-supply PCB
18650-3v3-supply is an open source PCB design by yvolodym, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 78 × 37 mm, with 33 components from 24 distinct parts.
Other key parts include the TP4056, DW01A, MT3608 and AP2112K-3.3. By type, the board carries 11 resistors, 8 capacitors, 5 ICs, 3 diodes, 2 connectors and 1 transistor.
It belongs with the power & battery designs in this gallery.
From the project
KiCad: stabile 3,3-V-Versorgung aus 18650-Li-Ion-Akku – TP4056-Ladung, DW01A/FS8205A-Schutz, MT3608-Boost, AP2112K-LDO
Stabile 3,3-V-Versorgung aus einer 18650-Li-Ion-Zelle, inklusive USB-Ladung und Zellschutz. KiCad-Projekt (KiCad 10).
1. Laden – USB-C-Buchse (P1, 5 V) → TP4056 (U1), Ladestrom ca. 0,9 A (R1 = 1,2 kΩ an PROG, laut Datenblatt-Tabelle; für 1 A: R1 = 1,1 kΩ). CC1/CC2 je 5,1 kΩ (R10/R11) nach GND, damit USB-C-Netzteile 5 V liefern. LEDs: D1 rot = lädt, D2 grün = voll. TEMP liegt an GND (NTC-Überwachung deaktiviert). 2. Akku + Schutz – 18650-Zelle (BT1) zwischen BAT+ und BAT−, DW01A (U5) + Dual-MOSFET FS8205A (Q1). Abschaltung bei Überladung 4,3 V / Tiefentladung 2,4 V / Überstrom. Systemmasse…
Main components on the 18650-3v3-supply
18650-3v3-supply bill of materials (BOM)
33 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U1 |
| 2 | DW01A | SOT-23-6 | U2, U5 |
| 1 | MT3608 | SOT-23-6 | U3 |
| 1 | AP2112K-3.3 | SOT-23-5 | U4 |
| 1 | FS8205A | TSSOP-8_4.4x3mm_P0.65mm | Q1 |
| 1 | Conn_01x03 | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | P1 |
| 1 | 18650 Li-Ion | NCR18650B | BT1 |
| 1 | SW_SPDT_XKB_DMx-xxxx-1 | Switch_Small | SW2 |
| 1 | LED rot (laedt) | LED_D2.0mm_W4.8mm_H2.5mm_FlatTop | D1 |
| 1 | LED gruen (voll) | LED_D2.0mm_W4.8mm_H2.5mm_FlatTop | D2 |
| 1 | SS14 | D_SMA | D3 |
| 1 | 22uH / >=2A | L_1206_3216Metric | L1 |
| 3 | 10uF | C_1206_3216Metric | C1, C2, C8 |
| 1 | 100nF | C_1206_3216Metric | C3 |
| 3 | 22uF | C_1206_3216Metric | C4, C5, C6 |
| 1 | 1uF | C_1206_3216Metric | C7 |
| 1 | 1.2k | R_1206_3216Metric | R1 |
| 3 | 1k | R_1206_3216Metric | R2, R3, R5 |
| 1 | 100R | R_1206_3216Metric | R4 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 22k | R_1206_3216Metric | R6 |
| 1 | 3.9k | R_1206_3216Metric | R7 |
| 2 | 100k | R_1206_3216Metric | R8, R9 |
| 2 | 5.1k | R_1206_3216Metric | R10, R11 |
18650-3v3-supply design files
The KiCad project lives in the yvolodym/18650-3v3-supply repository on GitHub; these links point at the commit this page was built from.
- LayoutAkku_3V3_Versorgung.kicad_pcb
- SchematicAkku_3V3_Versorgung.kicad_sch
- BOMREADME.md
18650-3v3-supply: common questions
How big is the 18650-3v3-supply PCB?
The 18650-3v3-supply measures 78 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 18650-3v3-supply?
33 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 18650-3v3-supply design files?
From the yvolodym/18650-3v3-supply repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 18650-3v3-supply design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which yvolodym chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k