Basicsensormodule
ZeniteSolar·MSC19·hardware/basicsensormodule.kicad_pcb
About the Basicsensormodule PCB
Basicsensormodule is an open source AVR/Arduino PCB design by ZeniteSolar, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 130.2 × 52.1 mm, with 56 components from 23 distinct parts.
Its main chip is the ATMEGA328P-PU, from the AVR/Arduino family. Other key parts include the MCP2551-I/SN, MCP2515-xSO, LM324 and LM7805. By type, the board carries 20 capacitors, 17 resistors, 7 diodes, 5 ICs, 4 connectors and 2 crystals.
It belongs with the power & battery and sensors designs in this gallery.
From the project
Voltage or Current Sensor Module for CANBUS with ATmega328p
Este módulo é reponsável por realizar as medições de tensão ou corrente e enviar pela rede CAN
- Tensões em modo diferencial (banco de baterias).
- Corrente de entrada (carga das baterias).
- Ensaio de funcionamento com cada sensor.
- Utilização de métodos matemáticos para determinar a equação que rege o comportamento do sensor, fornecendo uma leitura com melhor precisão.

Main components on the Basicsensormodule
Basicsensormodule bill of materials (BOM)
56 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2551-I/SN | SOIC-8_3.9x4.9mm_P1.27mm | U201 |
| 1 | MCP2515-xSO | SOIC-18W_7.5x11.6mm_P1.27mm | U202 |
| 1 | LM324 | SOIC-14_3.9x8.7mm_P1.27mm | U301 |
| 1 | ATMEGA328P-PU | DIP-28_W7.62mm_Socket | U401 |
| 1 | LM7805 | TO-220-3_Horizontal_TabDown_SMD | U501 |
| 2 | 16MHz | Crystal_HC49-U_Vertical | Y201, Y401 |
| 1 | SENSOR | TerminalBlock_bornier-4_P5.08mm | J102 |
| 1 | USART | PinHeader_1x04_P2.54mm_Vertical | J401 |
| 2 | RJ45 | RJ45_YH59_01 | J601, J602 |
| 1 | 500mA | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F501 |
| 3 | LL4148 | D_MiniMELF_Handsoldering | D101, D401, D501 |
| 1 | pesd1can | SOT-23_Handsoldering | D201 |
| 1 | 4V7 | D_MiniMELF_Handsoldering | D301 |
| 2 | LED_RED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D402, D403 |
| 10 | 100nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C102, C201, C202, C205, C401, C402, C405, C406 +2 |
| 4 | 22pF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C203, C204, C403, C404 |
| 4 | 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C301, C302, C303, C304 |
| 2 | 1uF | CP_EIA-6032-20_AVX-F_Pad2.25x2.35mm_HandSolder | C501, C504 |
| 1 | 120 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R201 |
| 1 | 4k7 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R202 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R203, R301, R303, R304, R308, R309, R401 |
| 1 | 100k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R302 |
| 7 | 1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R305, R306, R307, R402, R403, R404, R405 |
Basicsensormodule design files
The KiCad project lives in the ZeniteSolar/MSC19 repository on GitHub; these links point at the commit this page was built from.
Basicsensormodule: common questions
What microcontroller does the Basicsensormodule use?
The Basicsensormodule is built around the ATMEGA328P-PU, from the AVR/Arduino family.
How big is the Basicsensormodule PCB?
The Basicsensormodule measures 130.2 × 52.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Basicsensormodule?
56 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Basicsensormodule design files?
From the ZeniteSolar/MSC19 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Basicsensormodule design in my own project?
Yes, under the terms of its GPL-3.0 license, which ZeniteSolar chose for the repository.
Can I test firmware for the Basicsensormodule without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in MSC19
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k