MVC19
ZeniteSolar·MVC19·hardware/basicsensormodule.kicad_pcb
About the MVC19 PCB
MVC19 is an open source AVR/Arduino PCB design by ZeniteSolar, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 52.1 × 121 mm, with 40 components from 19 distinct parts.
Its main chip is the ATMEGA328P-PU, from the AVR/Arduino family. Other key parts include the MCP2551-I/SN, MCP2515-xSO and LM7805. By type, the board carries 16 capacitors, 8 resistors, 5 diodes, 4 ICs, 4 connectors and 2 crystals.
It belongs with the displays & leds and power & battery designs in this gallery.
From the project
Módulo de voltímetro interligado ao CAN
Este módulo é responsável por exibir os principais parâmetros do sistema para o piloto em um display OLED de 0,96" (SSD1306).
2. Filtragem dos dados - Utilizar o ID de cada módulo desejado - Conferir se o módulo está enviando informações corretamente, sinalizando em caso de falhas.
3. Formatação para exibição no display - Separar os dados conforme display conectado

Main components on the MVC19
MVC19 bill of materials (BOM)
40 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2551-I/SN | SOIC-8_3.9x4.9mm_P1.27mm | U201 |
| 1 | MCP2515-xSO | SOIC-18W_7.5x11.6mm_P1.27mm | U202 |
| 1 | ATMEGA328P-PU | DIP-28_W7.62mm_Socket | U401 |
| 1 | LM7805 | TO-220-3_Horizontal_TabDown_SMD | U501 |
| 2 | 16MHz | Crystal_HC49-U_Vertical | Y201, Y401 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | USART | PinHeader_1x04_P2.54mm_Vertical | J401 |
| 2 | RJ45 | RJ45_YH59_01 | J601, J602 |
| 1 | 500mA | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F501 |
| 1 | pesd1can | SOT-23_Handsoldering | D201 |
| 2 | LL4148 | D_MiniMELF_Handsoldering | D401, D501 |
| 2 | LED_RED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D402, D403 |
| 10 | 100nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C102, C201, C202, C205, C401, C402, C405, C406 +2 |
| 4 | 22pF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C203, C204, C403, C404 |
| 2 | 1uF | CP_EIA-6032-20_AVX-F_Pad2.25x2.35mm_HandSolder | C501, C504 |
| 1 | 120 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R201 |
| 1 | 4k7 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R202 |
| 2 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R203, R401 |
| 4 | 1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R402, R403, R404, R405 |
MVC19 design files
The KiCad project lives in the ZeniteSolar/MVC19 repository on GitHub; these links point at the commit this page was built from.
MVC19: common questions
What microcontroller does the MVC19 use?
The MVC19 is built around the ATMEGA328P-PU, from the AVR/Arduino family.
How big is the MVC19 PCB?
The MVC19 measures 52.1 × 121 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MVC19?
40 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the MVC19 design files?
From the ZeniteSolar/MVC19 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the MVC19 design in my own project?
Yes, under the terms of its GPL-3.0 license, which ZeniteSolar chose for the repository.
Can I test firmware for the MVC19 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k