Zone

zeyad-hisham-cyper·Solar-IoT-Smart-Irrigation-System·PCBs/Zone/Zone.kicad_pcb

Zone PCB layout, top view — open source ESP32 board by zeyad-hisham-cyper

About the Zone PCB

Zone is an open source ESP32 PCB design by zeyad-hisham-cyper, published on GitHub under the MIT license. It is a 2-layer board measuring 149 × 70 mm, with 31 components from 21 distinct parts.

Its main chip is the 74HC595, from the ESP32 family. By type, the board carries 7 connectors, 7 resistors, 5 diodes, 5 capacitors, 2 ICs and 2 switches.

It belongs with the iot & wireless, power & battery and sensors designs in this gallery.

From the project

A distributed, low-power irrigation platform that closes the loop between soil sensors in the field and a phone in your hand. It is built from three cooperating subsystems:

A distributed, low-power irrigation platform that closes the loop between soil sensors in the field and a phone in your hand. It is built from three cooperating subsystems:

1. Zone firmware (ESP32) — battery/solar sensor + valve endpoints that measure soil moisture, temperature and water flow, and open/close a solenoid valve on command. 2. Gateway firmware (ESP32) — the single Internet-connected node. It runs the irrigation decision engine, drives the pump, enforces safety, talks to the zones over ESP-NOW, and mirrors all state to the cloud over Wi-Fi. 3. Flutter mobile app — a real-time…

Zone, from the project README
From the project README

Main components on the Zone

Zone bill of materials (BOM)

31 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
74HC595
ESP32-DEVKITC-32E
U1
1
74HC595
YAAJ_DCDC_StepDown_LM2596
U2
1
2N2222
BC547
Q1
2
SCREW_TERMINAL_01X02
Screw_Terminal_01x02
J1, J8
2
SCREW_TERMINAL_01X02
Conn_01x03_Socket
J2, J3
1
CONN_01X15_PIN
Conn_01x03_Socket
J5
1
CONN_01X15_PIN
Conn_01x19_Pin
J6
1
Conn_01x19_Pin
J7
1
Buzzer
BZ1
1
SRD-12VDC-SL-C
SRD-05VDC-SL-C
K2
1
TL2285EE
S1
1
SW_Push
SW1
1
1N4007
D1
4
LED
D2, D4, D5, D6
1
100U
100u
C1
3
100N
100n
C2, C4, C5
1
470U
470u
C3
2
1k
R1, R3
1
4.7k
R4
3
220
R5, R6, R7
Show 1 more
QtyPartRefs
1
10k
R8

Zone design files

The KiCad project lives in the zeyad-hisham-cyper/Solar-IoT-Smart-Irrigation-System repository on GitHub; these links point at the commit this page was built from.

Zone: common questions

What microcontroller does the Zone use?

The Zone is built around the 74HC595, from the ESP32 family.

How big is the Zone PCB?

The Zone measures 149 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Zone?

31 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Zone design files?

From the zeyad-hisham-cyper/Solar-IoT-Smart-Irrigation-System repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Zone design in my own project?

Yes, under the terms of its MIT license, which zeyad-hisham-cyper chose for the repository.

Can I test firmware for the Zone without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Solar-IoT-Smart-Irrigation-System

Similar boards