Fireball mouse
zlice·fireball-mouse·kicad/Fireball.kicad_pcb
About the Fireball mouse PCB
Fireball mouse is an open source RP2040/RP2350 PCB design by zlice, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 71.7 × 49.8 mm, with 33 components from 17 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the TCR2EF19, PMW3360, TLV73333PDBV and W25Q128JVS. By type, the board carries 19 capacitors, 7 resistors, 5 ICs, 1 crystal and 1 connector.
It belongs with the sensors designs in this gallery.
From the project
Small PMW3360 fingertip mouse with a magnetic hall sensor joystick for scrolling and single 'fire' button for enter.
Small PMW3360 fingertip mouse with a magnetic hall sensor joystick for scrolling and single 'fire' button for enter.
Designed for Kailh Mute silent switches (the small 6-7mm box ones) and regular sized mouse switches for left/right click (12-13mm x 5-6mm). Bottom is designed for 4 feet with mounting screws near the back middle for the top shell. The top shell is open for minimal hand contact and weight reduction with no 'middleman' shell.

Main components on the Fireball mouse
Fireball mouse bill of materials (BOM)
33 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCR2EF19 | SOT-23-5 | U1 |
| 1 | PMW3360 | PMW3360 | U2 |
| 1 | RP2040 | RP2040-QFN-56 | U3 |
| 1 | TLV73333PDBV | SOT-23-5 | U4 |
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U5 |
| 1 | CRYSTAL_GND24 Crystal_GND24 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | CONN_01X04 Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 10 | 100N 100n | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8 +2 |
| 4 | 1u | C_0402_1005Metric | C10, C13, C15, C16 |
| 1 | 0.1U 0.1u | C_0603_1608Metric | C11 |
| 1 | 1u | C_0603_1608Metric | C12 |
| 1 | 4.7U 4.7u | C_0402_1005Metric | C14 |
| 2 | 30P 30p | C_0402_1005Metric | C18, C19 |
| 1 | 39 | R_0402_1005Metric | R1 |
| 2 | 10K 10k | R_0402_1005Metric | R2, R5 |
| 2 | 27 | R_0402_1005Metric | R3, R4 |
| 2 | 1k | R_0402_1005Metric | R6, R7 |
Fireball mouse design files
The KiCad project lives in the zlice/fireball-mouse repository on GitHub; these links point at the commit this page was built from.
Fireball mouse: common questions
What microcontroller does the Fireball mouse use?
The Fireball mouse is built around the RP2040, from the RP2040/RP2350 family.
How big is the Fireball mouse PCB?
The Fireball mouse measures 71.7 × 49.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fireball mouse?
33 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Fireball mouse design files?
From the zlice/fireball-mouse repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Fireball mouse design in my own project?
Yes, under the terms of its GPL-2.0 license, which zlice chose for the repository.
Can I test firmware for the Fireball mouse without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k