7 open source boards using the PMW3360
Real designs built with the PMW3360, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Pmw3360 pcb ffc
siderakb
27 × 22.5 mm13 parts2LCERN-OHL-P-2.0194Raspberry Pi
ORCA CORE
UEC-RMF-Rescue
99 × 94 mm182 parts2LNo license0ESP32
Trackball
mornepousse
52 × 72.1 mm51 parts2LNo license0RP2040/RP2350
Fireball mouse
zlice
71.7 × 49.8 mm33 parts2LGPL-2.00ESP32
MaSe
mornepousse
63.8 × 97.6 mm36 parts2LNo license0Raspberry Pi
ORCA CORE A
UEC-RMF-Rescue
99 × 99 mm96 parts2LNo license0ESP32
Mcu board
mornepousse
29 × 29.9 mm12 parts2LNo license0
The PMW3360 in open source designs
The gallery holds 7 open source boards using the PMW3360 from 4 GitHub repositories; a typical one measures about 63.8 × 72.1 mm and carries around 36 components.
100% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Pmw3360 pcb ffc by siderakb.
Parts used alongside the PMW3360
Microcontrollers on boards using the PMW3360
What boards using the PMW3360 are built for
PMW3360: common questions
Where can I find a PMW3360 reference design?
Each of the 7 boards on this page is a real design using the PMW3360. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the PMW3360?
The RP2040, TCR2EF19, TLV73333PDBV and W25Q128JVS appear in the most repositories here.
Which microcontrollers do boards using the PMW3360 use?
Most are built on ESP32 (3), Raspberry Pi (2) and RP2040/RP2350 (1).
How big is a typical board using the PMW3360?
The median is 63.8 × 72.1 mm, and 100% are two-layer designs.
What is the most popular open source board using the PMW3360?
By GitHub stars, Pmw3360 pcb ffc by siderakb, with 194 stars.
Can I simulate one of these boards using the PMW3360 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.