Grokbot home
ZMGID·grokbot-home·projects/creative-controller/pcb/creative-controller.kicad_pcb
About the Grokbot home PCB
Grokbot home is an open source ESP32 PCB design by ZMGID, published on GitHub. It is a 2-layer board measuring 87.9 × 87.5 mm, with 55 components from 35 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the USBLC6-2SC6, MCP73831T-2ACI/OT, AP2112K-3.3TRG1 and SN74LV1T34DBVR. By type, the board carries 16 resistors, 15 capacitors, 12 switches, 5 ICs, 2 connectors and 2 diodes.
From the project
Grok Bot account migration home (secrets encrypted)
- Mechanical: mechanical/ (print-ready STL in print/) - PCB (KiCad 9): pcb/ — regenerate with cd pcb && ./route.sh && ./export.sh; JLCPCB outputs in pcb/fab/ (gerbers zip, BOMJLCPCB.csv, CPLJLCPCB.csv, BOMdetailed.csv with LCSC stock/price/Basic-Extended/links, ERC/DRC reports) - Firmware: firmware/ (PlatformIO, Arduino-ESP32); prebuilt merged image firmware/bin/creativedial-esp32s3-merged.bin @0x0. Hardware self-test: hold TOP key while plugging in USB (or send {"cmd":"selftest","on":true}`), watch serial at 115200. - Config app: software/
Main components on the Grokbot home
Grokbot home bill of materials (BOM)
55 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N16R8 | ESP32-S3-WROOM-1 | U1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | MCP73831T-2ACI/OT | SOT-23-5 | U3 |
| 1 | AP2112K-3.3TRG1 | SOT-23-5 | U4 |
| 1 | SN74LV1T34DBVR | SOT-23-5 | U5 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | C295747 LiPo 3.7V | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | C255515 EC11E w/ switch 20mm D-shaft | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | ENC1 |
| 1 | Mouse wheel encoder 11mm (Kailh/TTC) | MouseEncoder_11mm_3pin | ENC2 |
| 2 | C53431191 KEY_TOP | SW_SPST_PTS645 | SW1, SW2 |
| 1 | C53431191 KEY_TR1 | SW_SPST_PTS645 | SW3 |
| 1 | C53431191 KEY_TR2 | SW_SPST_PTS645 | SW4 |
| 1 | C53431191 KEY_BR | SW_SPST_PTS645 | SW5 |
| 1 | C53431191 KEY_SIDE | SW_SPST_PTS645 | SW6 |
| 1 | C53431191 KEY_TALL1 | SW_SPST_PTS645 | SW7 |
| 1 | C53431191 KEY_TALL2 | SW_SPST_PTS645 | SW8 |
| 1 | C53431191 KEY_WHEEL | SW_SPST_PTS645 | SW9 |
| 1 | C318884 RESET | SW_SPST_TL3342 | SW10 |
| 1 | C318884 BOOT | SW_SPST_TL3342 | SW11 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCM12SMTR | SW_SPDT_PCM12 | SW12 |
| 1 | B5819W | D_SOD-123 | D1 |
| 1 | WS2812B-B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2 |
| 5 | 10UF 10uF | C_0603_1608Metric | C1, C4, C5, C6, C7 |
| 4 | 100NF 100nF | C_0402_1005Metric | C2, C8, C9, C10 |
| 1 | 1UF 1uF | C_0402_1005Metric | C3 |
| 4 | 10NF 10nF | C_0402_1005Metric | C11, C12, C13, C14 |
| 1 | 22UF 22uF | C_0805_2012Metric | C15 |
| 6 | 10K 10k | R_0402_1005Metric | R1, R2, R13, R14, R15, R16 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R3, R4 |
| 3 | 100K 100k | R_0402_1005Metric | R5, R8, R9 |
| 1 | 3.3K 3.3k | R_0402_1005Metric | R6 |
| 1 | 15K 15k | R_0402_1005Metric | R7 |
| 2 | 22K 22k | R_0402_1005Metric | R10, R11 |
| 1 | 39K 39k | R_0402_1005Metric | R12 |
Grokbot home design files
The KiCad project lives in the ZMGID/grokbot-home repository on GitHub; these links point at the commit this page was built from.
Grokbot home: common questions
What microcontroller does the Grokbot home use?
The Grokbot home is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.
How big is the Grokbot home PCB?
The Grokbot home measures 87.9 × 87.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Grokbot home?
55 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Grokbot home design files?
From the ZMGID/grokbot-home repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Grokbot home design in my own project?
The repository has no license, so all rights stay with ZMGID. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Grokbot home without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k