Dombyra.plus
zzertexx·dombyra.plus·PCB/dombyra.kicad_pcb
About the Dombyra.plus PCB
Dombyra.plus is an open source ESP32 PCB design by zzertexx, published on GitHub. It is a 2-layer board measuring 466.1 × 23 mm, with 65 components from 24 distinct parts.
Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the TP4056-42-ESOP8 and MT3608. By type, the board carries 39 diodes, 12 resistors, 4 capacitors, 3 ICs, 3 connectors and 1 module.
It belongs with the iot & wireless, power & battery and test & measurement designs in this gallery.
From the project
Device that will teach you playing on Kazakhi musical instrument Dombyra using electronics.
I had exact same problem, so I built this!
This device is solution for it. First hardware addon for Dombyra.
Using bunch of SK6812 LEDs on Dombyra's neck, it will show you which notes need to be pressed right now and after. By ESP32 and INMP441 mic, it will be controlled by local Website to choose notes and continue showing notes.
It consists of 2 PCBs. One on neck for LEDs and second one for Battery, Microphone and MCU. They are connected using 4-pin JST wires for GND, 5V and 2 data channels.
Main components on the Dombyra.plus
Dombyra.plus bill of materials (BOM)
65 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DEVKIT-V1 | MODULE_ESP32_DEVKIT_V1 | U1 |
| 1 | TP4056-42-ESOP8 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U2 |
| 1 | MT3608 | SOT-23-6 | U3 |
| 1 | ~ | INMP441 | M1 |
| 1 | Conn_01x04_Socket | PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Left | J1 |
| 1 | Conn_01x04_Socket | PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 1 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | J3 |
| 1 | Battery | PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | 10k | PinHeader_2x01_P2.00mm_Vertical | TH1 |
| 36 | SK6812 | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8 +28 |
| 1 | LED_Small | LED_D3.0mm | D39 |
| 1 | LED_Small | LED_D5.0mm | D40 |
| 1 | D | SMA_L4.3-W2.6-LS5.2-RD | D41 |
| 1 | L | L_1812_4532Metric | L4.7uH1 |
| 2 | 10uF | C_0805_2012Metric | C1, C2 |
| 2 | 22uF | C_1206_3216Metric | C3, C4 |
| 2 | 330 | R_0402_1005Metric | R1, R2 |
| 2 | R_Small | R_0805_2012Metric | R1k1, R1k2 |
| 1 | R_Small | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R2.4k1 |
| 2 | 5k1 | R_0603_1608Metric | R3, R4 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | R_Small | R_0603_1608Metric | R5.6k1, R68k1 |
| 1 | 0.4 ohm | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R6 |
| 1 | 15k | R_0402_1005Metric | R9 |
| 1 | 110k | R_0603_1608Metric | R10 |
Dombyra.plus design files
The KiCad project lives in the zzertexx/dombyra.plus repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/dombyra.kicad_pcb
- SchematicPCB/dombyra.kicad_sch
- BOMBOM.csv
Dombyra.plus: common questions
What microcontroller does the Dombyra.plus use?
The Dombyra.plus is built around the ESP32-DEVKIT-V1, from the ESP32 family.
How big is the Dombyra.plus PCB?
The Dombyra.plus measures 466.1 × 23 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dombyra.plus?
65 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Dombyra.plus design files?
From the zzertexx/dombyra.plus repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Dombyra.plus design in my own project?
The repository has no license, so all rights stay with zzertexx. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Dombyra.plus without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k