EmbeddedOscilloscope

01binary·switchback·boards/EmbeddedOscilloscope/EmbeddedOscilloscope.kicad_pcb

EmbeddedOscilloscope PCB layout, top view — open source ESP32 board by 01binary

About the EmbeddedOscilloscope PCB

EmbeddedOscilloscope is an open source ESP32 PCB design by 01binary, published on GitHub. It is a 2-layer board measuring 64.5 × 33 mm, with 40 components from 22 distinct parts.

Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the LM3671MFX-3.3_NOPB, MCP73831T-2ACI/OT and CH340C. By type, the board carries 16 resistors, 10 capacitors, 4 ICs, 3 connectors, 3 switches and 2 diodes.

It belongs with the audio, power & battery and keyboards designs in this gallery.

From the project

Custom double-neck guitar design with keyboard

A PCB used to display the waveform of an audio signal received from Bluetooth Audio on a small OLED screen built into a guitar handle.

The oscilloscope board uses connections for plugging in the OLED screen and a LiPo battery, all other components are integrated directly onto the board.

EmbeddedOscilloscope, from the project README
From the project README

Main components on the EmbeddedOscilloscope

EmbeddedOscilloscope bill of materials (BOM)

40 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM3671MFX-3.3_NOPB
U1
1
MCP73831T-2ACI/OT
MCP73831T-2ACI_OT
U2
1
ESP32-WROOM-32E
U3
1
CH340C
U5
1
DMN3135LVT-7
Q1
1
S2B-PH-SM4-TB
J1
1
CONN_01X20_PIN
Conn_01x20_Pin
J2
1
TYPE-C-31-M-12
USB_C_Receptacle_USB2.0_14P
J8
2
TS-1064S-A1B2-D4
S2, S3
1
C221666
SLIDE SWITCH
SW1
1
C12624
GREEN LED (DONE)
D1
1
C2286
RED LED (CHARGING)
D2
1
2.2UH
2.2uH
L1
4
100NF
100nF
C16, C22, C50, C51
3
10UF
10uF
C17, C18, C23
3
10UF
10uF
C19, C20, C21
2
RC0402FR-075K1L
5.1k
R1, R2
8
10K
R6, R7, R8, R9, R12, R14, R15, R16
1
100K
R10
1
2.5K
R11
Show 2 more
QtyPartRefs
2
1K
R13, R19
2
51K
R17, R18

EmbeddedOscilloscope design files

The KiCad project lives in the 01binary/switchback repository on GitHub; these links point at the commit this page was built from.

EmbeddedOscilloscope: common questions

What microcontroller does the EmbeddedOscilloscope use?

The EmbeddedOscilloscope is built around the ESP32-WROOM-32E, from the ESP32 family.

How big is the EmbeddedOscilloscope PCB?

The EmbeddedOscilloscope measures 64.5 × 33 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EmbeddedOscilloscope?

40 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the EmbeddedOscilloscope design files?

From the 01binary/switchback repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the EmbeddedOscilloscope design in my own project?

The repository has no license, so all rights stay with 01binary. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the EmbeddedOscilloscope without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in switchback

Similar boards