EmbeddedKeyboard
01binary·switchback·boards/EmbeddedKeyboard/EmbeddedKeyboard.kicad_pcb
About the EmbeddedKeyboard PCB
EmbeddedKeyboard is an open source ESP32 PCB design by 01binary, published on GitHub. It is a 4-layer board measuring 143.2 × 105.8 mm, with 108 components from 25 distinct parts.
Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the LM3671MFX-3.3_NOPB, MCP73831T-2ACI/OT, CH340C, TCA9548APWR and MPR121QR2. By type, the board carries 45 resistors, 36 capacitors, 18 ICs, 3 connectors, 2 switches and 2 diodes.
It belongs with the audio, keyboards and iot & wireless designs in this gallery.
From the project
Custom double-neck guitar design with keyboard
A PCB embedded at the bottom of a custom guitar, with capacitive touch electrodes that function like keyboard keys. Touching keys sends MIDI messages over Bluetooth.
Each of the 13 keys is divided into 12 electrodes and functions like a capacitive touch slider, allowing the user to slide their finger up and down on each key to control MIDI "brightness" parameter (CC74).

Main components on the EmbeddedKeyboard
EmbeddedKeyboard bill of materials (BOM)
108 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM3671MFX-3.3_NOPB | SOT95P280X145-5N | U1 |
| 1 | MCP73831T-2ACI/OT MCP73831T-2ACI_OT | MCP73831T-2ACI-OT | U2 |
| 1 | ESP32-WROOM-32E | ESP32-WROOM-32E-N4 | U3 |
| 1 | CH340C | CH340C | U4 |
| 1 | TCA9548APWR | SOP65P640X120-24N | U5 |
| 13 | MPR121QR2 | MPR121QR2 | U6, U7, U8, U9, U10, U11, U12, U13 +5 |
| 1 | DMN3135LVT-7 | DMN3135LVT-7 | Q1 |
| 1 | S2B-PH-SM4-TB | S2B-PH-SM4-TB | J1 |
| 1 | C51940124 EXTERNAL SWITCH | S2B-PH-SM4-TB | J2 |
| 1 | TYPE-C-31-M-12 USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J8 |
| 2 | TS-1064S-A1B2-D4 | TS-1064S-A1B2-D4 | S2, S3 |
| 1 | C12624 GREEN LED (DONE) | 150080GS75000 | D1 |
| 1 | C2286 RED LED (CHARGING) | 150080SS75000 | D2 |
| 1 | 2.2UH 2.2uH | NRH2412T2R2MNGH | L1 |
| 30 | 100NF 100nF | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8 +22 |
| 3 | 10UF 10uF | CP_EIA-3216-18_Kemet-A | C17, C18, C23 |
| 3 | 10UF 10uF | C_0402_1005Metric | C19, C20, C21 |
| 2 | RC0402FR-075K1L 5.1k | R_0402_1005Metric | R1, R2 |
| 22 | 10K | R_0402_1005Metric | R3, R4, R5, R6, R9, R12, R14, R15 +14 |
| 2 | 22R | 0805W8F220JT5E | R7, R8 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100K | R_0402_1005Metric | R10 |
| 1 | 2.5K | R_0402_1005Metric | R11 |
| 2 | 1K | R_0402_1005Metric | R13, R19 |
| 2 | 51K | R_0402_1005Metric | R17, R18 |
| 13 | 75K | R_0402_1005Metric | R22, R23, R25, R27, R29, R31, R33, R35 +5 |
EmbeddedKeyboard design files
The KiCad project lives in the 01binary/switchback repository on GitHub; these links point at the commit this page was built from.
EmbeddedKeyboard: common questions
What microcontroller does the EmbeddedKeyboard use?
The EmbeddedKeyboard is built around the ESP32-WROOM-32E, from the ESP32 family.
How big is the EmbeddedKeyboard PCB?
The EmbeddedKeyboard measures 143.2 × 105.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the EmbeddedKeyboard?
108 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the EmbeddedKeyboard design files?
From the 01binary/switchback repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the EmbeddedKeyboard design in my own project?
The repository has no license, so all rights stay with 01binary. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the EmbeddedKeyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in switchback
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k