MM-Project
0geder·MM-Project
About the MM-Project PCB
MM-Project is an open source PCB design by 0geder, published on GitHub. It is a 2-layer board measuring 51.6 × 73.1 mm, with 60 components from 34 distinct parts.
Other key parts include the CH224K, DRV8833PWPR, LM2596S-5, INA219AxD and TP4056-42-ESOP8. By type, the board carries 23 capacitors, 18 resistors, 10 ICs, 3 connectors, 3 inductors and 1 transistor.
It belongs with the power & battery and robotics & motion designs in this gallery.
From the project
The Micro-Mouse project on development of the powering system of the MM.
This repository contains the complete hardware design, testing documentation, and supporting files for the Power Subsystem developed by Group 14 as part of the University of Cape Town’s EEE3088F Micro-mouse Project.
The Power Subsystem forms the heart of the Micro-mouse robot, supplying regulated 3.3V and 5V rails, enabling safe LiPo battery charging, driving DC motors, and interfacing cleanly with the Processor and Motherboard modules.
Main components on the MM-Project
MM-Project bill of materials (BOM)
60 components, 34 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH224K | SOP100P600X180-11N | IC1 |
| 2 | DRV8833PWPR | IC_DRV8833PWPR | U1, U5 |
| 1 | LM2596S-5 | TO-263-5_TabPin3 | U2 |
| 1 | INA219AxD | SOT65P280X145-8N | U4 |
| 1 | TP4056-42-ESOP8 | SOIC127P600X175-9N | U7 |
| 1 | TPS63030DSK | WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm | U8 |
| 1 | SiP32431DR3DNP3-T1GE4 | SOT-363_SC-70-6 | U9 |
| 1 | SiP32431DR3DNP3-T1GE4 | SON50P120X160X60-5N | U10 |
| 1 | TPS63031DSK | WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm | U11 |
| 1 | 2N3904 | SOT-23 | Q2 |
| 1 | Conn_02x16_Odd_Even | PinHeader_2x16_P2.54mm_Vertical | J1 |
| 1 | Conn_02x01 | PinHeader_2x01_P2.00mm_Vertical | J2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | SS-12D06-G030 | SS-12D06_GSW | SW1 |
| 1 | 1N5822 | DIO_SS34 | D2 |
| 1 | 33μH | L_12x12mm_H4.5mm | L1 |
| 2 | 1.5µH | L_1206_3216Metric_Pad1.22x1.90mm_HandSolder | L5, L6 |
| 2 | 2.2μF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C13 |
| 1 | 680μF | C_Radial_D10.0mm_H20.0mm_P5.00mm | C3 |
| 3 | 10nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C10, C19 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | 10μF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6, C7, C9, C15, C17, C21, C22, C23 +1 |
| 5 | 100nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8, C11, C14, C20, C25 |
| 1 | 220μF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C12 |
| 2 | 1μF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C16, C18 |
| 1 | 0.15 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 2 | 4.7K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R11 |
| 2 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R22 |
| 1 | 6.8k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 3 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12, R13, R21 |
| 5 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R15, R16, R17, R19 |
| 1 | 5100 | R_0603_1608Metric | R18 |
| 1 | 3300 | R_0603_1608Metric | R20 |
| 1 | 1M | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R23 |
| 1 | 110k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24 |
MM-Project design files
The KiCad project lives in the 0geder/MM-Project repository on GitHub; these links point at the commit this page was built from.
- LayoutMicro-mouse Project.kicad_pcb
- SchematicMicro-mouse Project.kicad_sch
MM-Project: common questions
How big is the MM-Project PCB?
The MM-Project measures 51.6 × 73.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MM-Project?
60 components, from 34 distinct parts. The full bill of materials is listed on this page.
Where can I download the MM-Project design files?
From the 0geder/MM-Project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MM-Project design in my own project?
The repository has no license, so all rights stay with 0geder. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k