PGL FTDI Prog
4n3m4i1·PG_Logic·Boards/PGL_FTDI_Programmer/PGL_FTDI_Prog/PGL_FTDI_Prog.kicad_pcb
About the PGL FTDI Prog PCB
PGL FTDI Prog is an open source PCB design by 4n3m4i1, published on GitHub under the MIT license. It is a 4-layer board measuring 42 × 22 mm, with 46 components from 19 distinct parts.
Other key parts include the C5446, C190271, C193662 and PG_Logic_10_Pin_Tag_Connect_Programmer_Header. By type, the board carries 24 capacitors, 10 resistors, 4 ICs, 3 connectors, 2 diodes and 2 inductors.
It belongs with the dev boards & breakouts and usb & debug tools designs in this gallery.
From the project
Open Source FPGA Development Boards for Education and Deeply Embedded Applications
Main components on the PGL FTDI Prog
PGL FTDI Prog bill of materials (BOM)
46 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C5446 XC6206PxxxMR | SOT-23-3 | U1 |
| 1 | C190271 93LCxxAxxOT | SOT-23-6 | U4 |
| 1 | C193662 FT2232HQ | QFN-64-1EP_9x9mm_P0.5mm_EP4.35x4.35mm | U5 |
| 1 | PG_Logic_10_Pin_Tag_Connect_Programmer_Header | CH87102V200 | U7 |
| 1 | C9002 12.000 MHz, C9002 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | C963413 USB_C_Plug_USB2.0 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | P1 |
| 2 | C2297 LED | LED_0805_2012Metric | D2, D3 |
| 2 | C1002 FerriteBead_Small | L_0603_1608Metric | FB1, FB2 |
| 5 | C52923 1u | C_0402_1005Metric | C1, C2, C9, C14, C26 |
| 11 | C307331 100n | C_0402_1005Metric | C4, C5, C6, C10, C12, C15, C16, C18 +3 |
| 6 | C1779 4u7 | C_0805_2012Metric | C7, C8, C11, C13, C17, C27 |
| 2 | C1562 33p C0G | C_0402_1005Metric | C22, C23 |
| 4 | C25804 10k | R_0603_1608Metric | R1, R3, R5, R6 |
| 1 | C4190 2k2 | R_0603_1608Metric | R2 |
| 1 | C22790 12k 1% | R_0603_1608Metric | R4 |
| 2 | C23206 56k | R_0603_1608Metric | R7, R8 |
| 2 | C23151 330R | R_0603_1608Metric | R11, R14 |
PGL FTDI Prog design files
The KiCad project lives in the 4n3m4i1/PG_Logic repository on GitHub; these links point at the commit this page was built from.
PGL FTDI Prog: common questions
How big is the PGL FTDI Prog PCB?
The PGL FTDI Prog measures 42 × 22 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the PGL FTDI Prog?
46 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PGL FTDI Prog design files?
From the 4n3m4i1/PG_Logic repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PGL FTDI Prog design in my own project?
Yes, under the terms of its MIT license, which 4n3m4i1 chose for the repository.
More boards in PG_Logic
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979