Wire connect checker
74th·74th-oshw-projects·74TH-G057-diy_cable_checker/wire_connect_checker.kicad_pcb
About the Wire connect checker PCB
Wire connect checker is an open source RISC-V PCB design by 74th, published on GitHub under the MIT license. It is a 2-layer board measuring 53.5 × 69.5 mm, with 72 components from 19 distinct parts.
Its main chip is the CH32V003F4P6, from the RISC-V family. Other key parts include the AMS1117 and CH213K. By type, the board carries 23 resistors, 21 diodes, 10 transistors, 9 connectors, 3 ICs and 3 capacitors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
74th のPCBデータを公開しているプロジェクト
- 2024-12 [[74TH-G060]7Seg Grove](./74TH-G060-7seg-grove/): four 7-segment LEDs using the I2C protocol via Grove: Grove I2Cで7セグLEDを制御できるモジュール。 - 2024-08 [[74TH-G054]Grove Keymouse](./74TH-G054-grovekeymouse/): Grove UART device that uses CH9329 to act as keyboard and mouse via UART. CH9329 を使って UART 経由でキーボード、マウスとして振るわせる、Grove UART デバイス - 2024-07 [[74TH-G053]USB Switch Adapter](./74TH-G053-usbswitchadapter/): スイッチを追加する USB アダプタ - 2024-06 [[74TH-G050]Grove Universal Board](./74TH-G050-groveuniversalboard/): Grove デバイスを作るための小型ユニバーサル基板 - 2024-06 [[74TH-G049]Grove Qwiic debug…
Main components on the Wire connect checker
Wire connect checker bill of materials (BOM)
72 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH32V003F4P6 | Package_TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | AMS1117 | Package_SOT-89-3 | U3 |
| 1 | CH213K | Package_SOT-23 | U4 |
| 10 | 2N7002 | Package_SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +2 |
| 2 | SH1.0 | Connector_SH-1.0_SMD_4Pin | CH1, CH6 |
| 2 | BoxPinHeader2x3 | Connector_BoxPinHeader_2x03_P1.27mm | CH2, CH9 |
| 2 | HY2.0 | Connector_HY-2.0_TH-Vertical_4Pin | CH3, CH7 |
| 2 | BoxPinHeader2x5 | Connector_BoxPinHeader_2x05_P1.27mm | CH4, CH10 |
| 1 | USB2.0-C_SMT | Connector_USB-C-Receptacle_SMT_12-Pin_Simple | J1 |
| 2 | XH2.5 | JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | CH5, CH8 |
| 1 | SWD | PinOut_Pin_3_3GND | CH11 |
| 1 | RED | LED_0805_2012 | D1 |
| 16 | BLUE | LED_0805_2012 | D2, D3, D4, D5, D6, D7, D8, D12 +8 |
| 4 | YELLOW | LED_0805_2012 | D9, D10, D11, D13 |
| 2 | 1u | Capacitor_0805_2012 | C1, C2 |
| 1 | 100n | Capacitor_0805_2012 | C3 |
| 3 | 5.1k | Register_0805_2012 | R1, R2, R5 |
| 16 | 10k | Register_0805_2012 | R3, R4, R6, R7, R8, R9, R10, R14 +8 |
| 4 | 1k | Register_0805_2012 | R11, R12, R13, R15 |
Wire connect checker design files
The KiCad project lives in the 74th/74th-oshw-projects repository on GitHub; these links point at the commit this page was built from.
Wire connect checker: common questions
What microcontroller does the Wire connect checker use?
The Wire connect checker is built around the CH32V003F4P6, from the RISC-V family.
How big is the Wire connect checker PCB?
The Wire connect checker measures 53.5 × 69.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Wire connect checker?
72 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Wire connect checker design files?
From the 74th/74th-oshw-projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Wire connect checker design in my own project?
Yes, under the terms of its MIT license, which 74th chose for the repository.
Can I test firmware for the Wire connect checker without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
More boards in 74th-oshw-projects
Lopo DCDC Testing
74th
34.3 × 39.4 mm37 parts2LMIT1Grove Universal Board
74th
33 × 22.9 mm31 parts2LMIT1RISC-V
7Seg-Grove
74th
70 × 20.5 mm30 parts2LMIT1ESP32
WiFi KeyMouse
74th
20 × 42.4 mm26 parts2LMIT1RISC-V
Button unit grove i2c
74th
92.5 × 22 mm21 parts2LMIT174TH-G070-USB Power Adapter
74th
36 × 23 mm20 parts2LMIT1RISC-V
Ch32v003 test board
74th
50 × 54 mm20 parts2LMIT1Grove Expander
74th
13.5 × 65 mm17 parts2LMIT1RISC-V
74TH-G068-1Key CH32V003
74th
19 × 37.1 mm17 parts2LMIT1RISC-V
Power Switch Adapter
74th
20.3 × 33.3 mm11 parts2LMIT1Nordic nRF
TEST-XIAO-nRF5240
74th
25.4 × 31.8 mm6 parts2LMIT1
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105