23 open source boards using the CH213K
Real designs built with the CH213K, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
HSLinkPro
cherry-embedded
44 × 44 mm144 parts4LApache-2.04474th kicad parts
74th
39.5 × 18.7 mm10 parts2LCC0-1.011ESP32
NHK 2024 R2 MD mother
ararobo
100 × 60 mm209 parts4LMIT5ESP32
Mini-AI-Camera-Module
bartsil
25 × 25 mm60 parts4LApache-2.02STM32
Astrouniboard
xlazam01
35 × 42 mm119 parts2LNo license1Konoha
aisuneko
80 × 80 mm97 parts4LCERN-OHL-S-2.01RISC-V
Wire connect checker
74th
53.5 × 69.5 mm72 parts2LMIT1RISC-V
Alchemy
SteveLRojas
55 × 85 mm61 parts4LCERN-OHL-P-2.01ESP32
Bridge writer
tmcit-ararobo-2026a
100 × 65 mm226 parts4LMIT0STM32
F303k8-led matrix-4layer
Netetra
35 × 25 mm98 parts4LNo license0RISC-V
CH32V203-ProMicro-Like
74th
17.8 × 33 mm27 parts2LMIT10STM32
Astrouniboard.kicad pcb bck
xlazam01
35 × 42 mm119 parts2LNo license1RISC-V
Ch32v003-promicro
74th
17.8 × 33 mm24 parts2LMIT10AVR/Arduino
Mb n boost
McbeEringi
100 × 86 mm60 parts2LMIT2Msxnano carrier
Papipapito
85 × 56 mm25 parts2LNo license1RISC-V
7Seg-Grove
74th
70 × 20.5 mm30 parts2LMIT1RISC-V
CH32V006-full
74th
20.3 × 47 mm19 parts2LMIT10RISC-V
Button unit grove i2c
74th
92.5 × 22 mm21 parts2LMIT1RISC-V
Ch32v00x promicro
74th
17.8 × 33 mm17 parts2LMIT10WCH CH32/CH55x
Ch32x035-promicro usb pd
74th
17.8 × 31.8 mm17 parts2LMIT10RISC-V
CH32V00x-SOIC8 [74TH-G061]
74th
15.2 × 23.5 mm13 parts2LMIT10RISC-V
74TH-G068-1Key CH32V003
74th
19 × 37.1 mm17 parts2LMIT1Ch340-usb uart vcut
Netetra
28.5 × 12.3 mm19 parts2LNo license0
How designs wire the CH213K
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the CH213K connects to, and the resistors, capacitors and other passives placed on it.
- The VO- pin has a decoupling capacitor on 8 of 13 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VO-pin 2 | Connected to: 5V 92% |
|
| VI+pin 3 | Connected to: VBUS 54% · a signal 46% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include HSLinkPro by cherry-embedded, 74th kicad parts by 74th, Ch32v003-promicro by 74th and NHK 2024 R2 MD mother by ararobo.
The CH213K in open source designs
The gallery holds 23 open source boards using the CH213K from 13 GitHub repositories; a typical one measures about 35 × 37.1 mm and carries around 30 components.
70% are two-layer designs, the rest use four layers or more, and 78% carry an open source license.
The most starred is HSLinkPro by cherry-embedded.
Parts used alongside the CH213K
Microcontrollers on boards using the CH213K
What boards using the CH213K are built for
CH213K: common questions
Where can I find a CH213K reference design?
Each of the 23 boards on this page is a real design using the CH213K. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the CH213K VO- pin?
The VO- pin has a decoupling capacitor on 8 of 13 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 13 open source designs using the CH213K.
What parts are used alongside the CH213K?
The USBLC6-2SC6, AMS1117-3.3, AMS1117, CH32V003F4P6 and CH32V203C8T6 appear in the most repositories here.
Which microcontrollers do boards using the CH213K use?
Most are built on RISC-V (10), ESP32 (3), STM32 (3) and AVR/Arduino (1).
How big is a typical board using the CH213K?
The median is 35 × 37.1 mm, and 70% are two-layer designs.
What is the most popular open source board using the CH213K?
By GitHub stars, HSLinkPro by cherry-embedded, with 44 stars.
Can I simulate one of these boards using the CH213K before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.