ESP32-C3-MINI-1-panelized
About the ESP32-C3-MINI-1-panelized PCB
ESP32-C3-MINI-1-panelized is an open source ESP32 PCB design by 74th, published on GitHub under the MIT license. It is a 2-layer board measuring 20.3 × 31.1 mm, with 21 components from 20 distinct parts.
Its main chip is the ESP32-C3-MINI-1, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 7 resistors, 5 capacitors, 2 ICs, 2 connectors, 2 switches and 1 diode.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
ESP32 Dev Boards PCB
- 回路図 Semantics pdf kicanvas - PCB pdf kicanvas
Main components on the ESP32-C3-MINI-1-panelized
ESP32-C3-MINI-1-panelized bill of materials (BOM)
21 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-MINI-1 | ESP32-C3-MINI-1 | U1 |
| 1 | AMS1117-3.3 | Regulator_AMS1117_SOT-89 | U2 |
| 1 | ESPProg-UART | BoxPinHeader_2x03_P1.27mm_Vertical | J1 |
| 1 | USB2.0_C | USB-C-12-Pin-SMD | J2 |
| 1 | ProMicro-LeftPin | ProMicro_LIKE_LEFT | CH1 |
| 1 | ProMicro-RightPin | ProMicro_LIKE_RIGHT | CH2 |
| 1 | SKRPABE010 RESET | SKRPABE010 | SW1 |
| 1 | SKRPABE010 BOOT | SKRPABE010 | SW2 |
| 1 | PWR | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | 10U 10u | Capacitor_0805_2012 | C1 |
| 1 | 10U 100n | Capacitor_0805_2012 | C2 |
| 2 | 100N 100n | Capacitor_0805_2012 | C3, C4 |
| 1 | 10u | Capacitor_0805_2012 | C5 |
| 1 | 5.1K 10k | Register_0805_2012 | R1 |
| 1 | 10K 10k | Register_0805_2012 | R2 |
| 1 | 10K 0 | Register_0805_2012 | R3 |
| 1 | 5.1K 0 | Register_0805_2012 | R4 |
| 1 | 10K 1k | Register_0805_2012 | R5 |
| 1 | 5.1K 5.1k | Register_0805_2012 | R6 |
| 1 | 5.1k | Register_0805_2012 | R7 |
ESP32-C3-MINI-1-panelized design files
The KiCad project lives in the 74th/esp32-dev-boards repository on GitHub; these links point at the commit this page was built from.
ESP32-C3-MINI-1-panelized: common questions
What microcontroller does the ESP32-C3-MINI-1-panelized use?
The ESP32-C3-MINI-1-panelized is built around the ESP32-C3-MINI-1, from the ESP32 family.
How big is the ESP32-C3-MINI-1-panelized PCB?
The ESP32-C3-MINI-1-panelized measures 20.3 × 31.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-C3-MINI-1-panelized?
21 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-C3-MINI-1-panelized design files?
From the 74th/esp32-dev-boards repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the ESP32-C3-MINI-1-panelized design in my own project?
Yes, under the terms of its MIT license, which 74th chose for the repository.
Can I test firmware for the ESP32-C3-MINI-1-panelized without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in esp32-dev-boards
ESP32ESP32-H2-MINI-1
50.3 × 60.4 mm46 parts2LMIT8
ESP32ESP32-Writer
54.6 × 31.1 mm29 parts2LMIT8
ESP32ESP32-Write-CH9102F
34.3 × 19.5 mm25 parts2LMIT8
ESP32ESP32C3DevBoard
25.4 × 29.2 mm24 parts2LMIT8
ESP32ESP32-C3-MINI-1
20.3 × 46.4 mm22 parts2LMIT8
ESP32ESP32-C6-WROOM-1 Dev Board
25.4 × 36.8 mm22 parts2LMIT8
ESP32ESP32-WROOM-32
25.4 × 34.3 mm21 parts2LMIT8
ESP32ESP32-S3-WROOM-1
25.4 × 51.3 mm19 parts2LMIT8
ESP32ESP32-writer7
31.2 × 30.6 mm18 parts2LMIT8
ESP32ESP32-writer
31.8 × 30.6 mm18 parts2LMIT8
ESP32ESP32-Writer-CH340X
14.2 × 10.7 mm7 parts2LMIT8
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k