Polaris

aargar1·polaris

Polaris PCB layout, top view — open source FPGA board by aargar1

About the Polaris PCB

Polaris is an open source FPGA PCB design by aargar1, published on GitHub under the CERN-OHL-W-2.0 license. It is a 6-layer board measuring 100.3 × 74.8 mm, with 87 components from 37 distinct parts.

Its main chip is the ICE40UP5K-SG48I, from the FPGA family. Other key parts include the 74CBTLV3126PW,118, WM8524CGEDT, W25Q16JVSNIQ, TLV62568DBVR and MIC5504-3.3YM5. By type, the board carries 37 resistors, 29 capacitors, 7 ICs, 7 connectors, 3 inductors and 1 crystal.

It belongs with the dev boards & breakouts and audio designs in this gallery.

From the project

Polaris is a feature-rich development board for the iCE40 FPGA.

- Lattice iCE40 FPGA - VGA output with audio support - SD card interface - 2× USB Type-A ports - User-controllable LED - GPIO and SPI headers

Polaris is plug-and-play compatable with the yosys toolchain. The iCEStudio development enviornment provides a great ecosystem for development on Polaris and iCE40-based boards in general.

Thanks to the open-source FPGA and KiCad communities, whose tools and documentation made this project possible.

Polaris, from the project README
From the project README

Main components on the Polaris

Polaris bill of materials (BOM)

87 components, 37 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ICE40UP5K-SG48I
U1
1
74CBTLV3126PW,118
U2
1
WM8524CGEDT
U3
1
W25Q16JVSNIQ
U4
1
TLV62568DBVR
U7
1
MIC5504-3.3YM5
U8
1
SN74AHC00PWR
U9
1
SX5M25.000M20F30TNN
X1
1
C3121412
VGA
J1
1
C5156616
Prog
J2
1
C341097
SD_Card
J3
1
C725886
Bus
J4
2
C2880618
USB_A
J5, J6
1
C22434582
Barrel_Jack
J7
1
C5360898
Flash enable
JP1
1
SW_Push
SW1
1
C7117555
LED_BGKR
D1
2
C1027
FerriteBead_Small
FB1, FB2
1
NRS4018T2R2MDGJ
L1
9
100NF
100nF
C1, C2, C3, C4, C5, C10, C14, C27 +1
Show 17 more
QtyPartRefs
7
4.7UF
4.7uF
C6, C7, C8, C9, C17, C18, C19
1
2.2UF
2.2uF
C11
1
1u
C12
1
1uF
C13
2
2.7NF
2.7nF
C15, C16
8
10UF
10uF
C23, C24, C25, C26, C28, C29, C31, C32
3
536
R1, R5, R9
3
1070
R2, R6, R10
3
2150
R3, R7, R11
3
4300
R4, R8, R12
2
820
R13, R14
4
10K
10k
R15, R16, R18, R34
10
47K
47k
R17, R19, R20, R21, R22, R23, R24, R27 +2
2
560
R25, R26
2
1
R28, R29
2
1.5K
1.5k
R32, R33
3
330
R35, R36, R37

Polaris design files

The KiCad project lives in the aargar1/polaris repository on GitHub; these links point at the commit this page was built from.

Polaris: common questions

What microcontroller does the Polaris use?

The Polaris is built around the ICE40UP5K-SG48I, from the FPGA family.

How big is the Polaris PCB?

The Polaris measures 100.3 × 74.8 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the Polaris?

87 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Polaris design files?

From the aargar1/polaris repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Polaris design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which aargar1 chose for the repository.

Can I test firmware for the Polaris without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.

Similar boards