5 open source boards using the WM8524CGEDT
Real designs built with the WM8524CGEDT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
VERA MODULE A2
gianlucarenzi
177.8 × 77.3 mm181 parts2LGPL-3.00ESP32
Vera-Module-RBL-C64
gianlucarenzi
143 × 162.5 mm175 parts2LGPL-3.00ESP32
Vera-Module-RBL-XE
gianlucarenzi
143 × 162.5 mm175 parts2LGPL-3.00Miniamp
wafaffles
130 × 57 mm92 parts6LNo license0FPGA
Polaris
aargar1
100.3 × 74.8 mm87 parts6LCERN-OHL-W-2.00
How designs wire the WM8524CGEDT
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the WM8524CGEDT connects to, and the resistors, capacitors and other passives placed on it.
- The LINEVOUTL pin has a series resistor on 5 of 5 designs, most often 560 Ω.
- The CPVOUTN pin has a capacitor to GND on 5 of 5 designs, most often 1 µF.
- The CPCB pin has a series capacitor on 5 of 5 designs, most often 1 µF.
- The CPCA pin has a series capacitor on 5 of 5 designs, most often 1 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| LINEVOUTLpin 1 | Connected to: Signal 100% |
|
| CPVOUTNpin 2 | Connected to: Signal 100% |
|
| CPCBpin 3 | Connected to: Signal 100% |
|
| LINEGNDpin 4 | Connected to: GND 100% | — |
| CPCApin 5 | Connected to: Signal 100% |
|
| LINEVDDpin 6 | Connected to: 3.3V 100% | — |
| MCLKpin 10 | Connected to: Signal 100% |
|
| MUTEpin 11 | Connected to: 3.3V 60% · a signal 40% | — |
| AIFMODEpin 12 | Connected to: 3.3V 60% · a signal 40% | — |
| AGNDpin 13 | Connected to: GND 100% | — |
| VMIDpin 14 | Connected to: Signal 100% |
|
| AVDDpin 15 | Connected to: 3.3V 80% · a signal 20% |
|
| LINEVOUTRpin 16 | Connected to: Signal 100% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Polaris by aargar1, VERA MODULE A2 by gianlucarenzi, Vera-Module-RBL-C64 by gianlucarenzi and Vera-Module-RBL-XE by gianlucarenzi.
The WM8524CGEDT in open source designs
The gallery holds 5 open source boards using the WM8524CGEDT from 5 GitHub repositories; a typical one measures about 143 × 77.3 mm and carries around 175 components.
60% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is VERA MODULE A2 by gianlucarenzi.
Parts used alongside the WM8524CGEDT
What boards using the WM8524CGEDT are built for
WM8524CGEDT: common questions
Where can I find a WM8524CGEDT reference design?
Each of the 5 boards on this page is a real design using the WM8524CGEDT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the WM8524CGEDT LINEVOUTL pin?
The LINEVOUTL pin has a series resistor on 5 of 5 designs, most often 560 Ω. Counted from the KiCad layouts of 5 open source designs using the WM8524CGEDT.
How is the WM8524CGEDT CPVOUTN pin connected?
The CPVOUTN pin has a capacitor to GND on 5 of 5 designs, most often 1 µF. Counted from the KiCad layouts of 5 open source designs using the WM8524CGEDT.
How is the WM8524CGEDT CPCB pin connected?
The CPCB pin has a series capacitor on 5 of 5 designs, most often 1 µF. Counted from the KiCad layouts of 5 open source designs using the WM8524CGEDT.
What parts are used alongside the WM8524CGEDT?
The W25Q16JVSNIQ, 74CBTLV3126PW,118, 74LVC4245APW_118, AMS1117-1.2 and AMS1117-3.3 appear in the most repositories here.
Which microcontrollers do boards using the WM8524CGEDT use?
Most are built on ESP32 (3) and FPGA (1).
How big is a typical board using the WM8524CGEDT?
The median is 143 × 77.3 mm, and 60% are two-layer designs.
What is the most popular open source board using the WM8524CGEDT?
By GitHub stars, VERA MODULE A2 by gianlucarenzi, with 0 stars.
Can I simulate one of these boards using the WM8524CGEDT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.