TEAM5 DOUG
aaron02·TEAM5_DOUG·Controller/HW/KiCad_Files/Controller.kicad_pcb
About the TEAM5 DOUG PCB
TEAM5 DOUG is an open source ESP32 PCB design by aaron02, published on GitHub. It is a 4-layer board measuring 70 × 70 mm, with 81 components from 34 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AP1117-33, USBLC6-2SC6, CP2102N-AXX-XQFN28 and MAX98357AETE+T. By type, the board carries 29 resistors, 21 diodes, 12 capacitors, 6 connectors, 5 ICs and 5 transistors.
Main components on the TEAM5 DOUG
TEAM5 DOUG bill of materials (BOM)
81 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP1117-33 | SOT-223-3_TabPin2 | U1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | CP2102N-AXX-XQFN28 CP2102N-Axx-xQFN28 | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U3 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U4 |
| 1 | MAX98357AETE+T MAX98357A | QFN-16-1EP_3x3mm_P0.5mm_EP1.45x1.45mm | U5 |
| 3 | MMBT3904 | SOT-23 | Q1, Q2, Q3 |
| 2 | NX138AK | SOT-23 | Q4, Q5 |
| 1 | USB | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | 3221-10-0300-00 JTAG | CNC_Tech-3220-10-0300-00-MFG | J2 |
| 1 | B2B-PH-SM4-TBT(LF)(SN) Speaker | JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J3 |
| 1 | 1175-1621 Driver | IDC-Header_2x05_P2.54mm_Vertical_SMD | J4 |
| 1 | 455-2639-1 Groove | CONN_BM04B-PASS-1-TFTLFSN_JST | J5 |
| 1 | 455-1790-1 QWIIC | JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J6 |
| 1 | DS04-254-2-03BK-SMT ESP Config | SW_DIP_SPSTx03_Slide_Omron_A6S-310x_W8.9mm_P2.54mm | SW1 |
| 1 | Reset | SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW2 |
| 1 | 563-1217-1 Gain | Nidec_Copal_SH-7010B | SW3 |
| 2 | NSR0320 | D_SOD-323 | D1, D13 |
| 1 | 475-2488-1 Power | LED_0805_2012Metric | D2 |
| 1 | 475-1410-1 TX | LED_0805_2012Metric | D3 |
| 1 | 475-1410-1 RX | LED_0805_2012Metric | D4 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 475-1410-1 Status | LED_0805_2012Metric | D5 |
| 1 | 475-1278-1 Error | LED_0805_2012Metric | D6 |
| 1 | 475-1410-1 WiFi | LED_0805_2012Metric | D7 |
| 1 | 475-1410-1 MQTT | LED_0805_2012Metric | D8 |
| 12 | D1213A | D_SOD-323 | D9, D10, D11, D12, D14, D15, D16, D17 +4 |
| 5 | 10U 10u | C_0805_2012Metric | C1, C2, C4, C6, C7 |
| 6 | 100N 100n | C_0805_2012Metric | C3, C8, C9, C10, C11, C12 |
| 1 | 1u | C_0805_2012Metric | C5 |
| 9 | 1k | R_0805_2012Metric | R1, R4, R10, R11, R15, R17, R18, R19 +1 |
| 2 | 5.1K 5.1k | R_0805_2012Metric | R2, R3 |
| 1 | 22.1K 22.1k | R_0805_2012Metric | R5 |
| 1 | 47.5K 47.5k | R_0805_2012Metric | R6 |
| 15 | 10K 10k | R_0805_2012Metric | R7, R8, R9, R12, R13, R14, R16, R21 +7 |
| 1 | 100K 100k | R_0805_2012Metric | R23 |
TEAM5 DOUG design files
The KiCad project lives in the aaron02/TEAM5_DOUG repository on GitHub; these links point at the commit this page was built from.
TEAM5 DOUG: common questions
What microcontroller does the TEAM5 DOUG use?
The TEAM5 DOUG is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the TEAM5 DOUG PCB?
The TEAM5 DOUG measures 70 × 70 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the TEAM5 DOUG?
81 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TEAM5 DOUG design files?
From the aaron02/TEAM5_DOUG repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TEAM5 DOUG design in my own project?
The repository has no license, so all rights stay with aaron02. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TEAM5 DOUG without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k