ESP+Power Only
aaronluebbert·ChessLink·pcb/Microcontroller Lab Summer 2026/ESP+Power_Only/ESP+Power_Only.kicad_pcb
About the ESP+Power Only PCB
ESP+Power Only is an open source ESP32 PCB design by aaronluebbert, published on GitHub. It is a 2-layer board measuring 55.2 × 137.2 mm, with 35 components from 24 distinct parts.
Its main chip is the ESP, from the ESP32 family. Other key parts include the TLV62568DBVR, SN74AHCT125N and TLV61048DBVR. By type, the board carries 12 resistors, 7 capacitors, 5 switches, 4 connectors, 3 ICs and 2 inductors.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
houses code from our Microcontroller Project Lab from Summer 2026 at TTU
A smart chessboard built from scratch: custom PCBs, 64 Hall-effect sensors, 64 RGB LEDs, and an ESP32 running FreeRTOS. It plays over the board against a friend, against Stockfish, or against real opponents on Lichess.
Built for the Microcontroller Lab at Texas Tech University, Summer 2026, as a three-person group project. Inspired by commercial boards like ChessUp 2.
Main components on the ESP+Power Only
ESP+Power Only bill of materials (BOM)
35 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV62568DBVR | TLV62568DBVR | U1 |
| 1 | SN74AHCT125N | DIP-14_W7.62mm_LongPads | U2 |
| 1 | TLV61048DBVR | TLV61048DBVR | U4 |
| 1 | ~ | ESP | J1 |
| 1 | Power OUT | Pin header spacing | J2 |
| 1 | SR_QH_Return | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Signals OUT | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | ~ | Battery_Charger_Board | B1 |
| 4 | SW_Push | SW_TH_Tactile_Omron_B3F-100x | SW1, SW2, SW3, SW4 |
| 1 | SW_SPDT | Switch | SW5 |
| 1 | C8678 D | ChessLink_Schottky_Diode | D1 |
| 1 | 10UH 10uH | ChessLink_10uH_Inductor | L1 |
| 1 | 2.2UH 2.2uH | ChessLink_2.2uH_Inductor | L2 |
| 2 | 0.1UF 0.1uF | C_0402_1005Metric | C1, C4 |
| 3 | 10UF 10uF | C_0603_1608Metric | C2, C5, C6 |
| 1 | 4.7UF 4.7uF | C_0603_1608Metric | C3 |
| 1 | 1UF 1uF | C_0603_1608Metric | C7 |
| 5 | 10KR 10kR | R_1206_3216Metric | R1, R2, R3, R4, R5 |
| 1 | 499KR 499kR | R_0402_1005Metric | R6 |
| 1 | 27KR 27kR | R_1206_3216Metric | R7 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1KR 1kR | R_1206_3216Metric | R8 |
| 2 | 100KR 100kR | R_0603_1608Metric | R9, R14 |
| 1 | 2KR 2kR | R_0805_2012Metric | R10 |
| 1 | 450KR 450kR | R_0402_1005Metric | R11 |
ESP+Power Only design files
The KiCad project lives in the aaronluebbert/ChessLink repository on GitHub; these links point at the commit this page was built from.
ESP+Power Only: common questions
What microcontroller does the ESP+Power Only use?
The ESP+Power Only is built around the ESP, from the ESP32 family.
How big is the ESP+Power Only PCB?
The ESP+Power Only measures 55.2 × 137.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP+Power Only?
35 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP+Power Only design files?
From the aaronluebbert/ChessLink repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP+Power Only design in my own project?
The repository has no license, so all rights stay with aaronluebbert. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP+Power Only without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in ChessLink
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k