Sensors+LEDs
aaronluebbert·ChessLink·pcb/Microcontroller Lab Summer 2026/Sensors+LEDs/Sensors+LEDs.kicad_pcb
About the Sensors+LEDs PCB
Sensors+LEDs is an open source PCB design by aaronluebbert, published on GitHub. It is a 2-layer board measuring 57.1 × 456.8 mm, with 41 components from 11 distinct parts.
Other key parts include the A3144 and SN74HC165N. By type, the board carries 10 resistors, 9 ICs, 9 capacitors, 8 LEDs and 5 connectors.
It belongs with the sensors designs in this gallery.
From the project
houses code from our Microcontroller Project Lab from Summer 2026 at TTU
A smart chessboard built from scratch: custom PCBs, 64 Hall-effect sensors, 64 RGB LEDs, and an ESP32 running FreeRTOS. It plays over the board against a friend, against Stockfish, or against real opponents on Lichess.
Built for the Microcontroller Lab at Texas Tech University, Summer 2026, as a three-person group project. Inspired by commercial boards like ChessUp 2.
Main components on the Sensors+LEDs
Sensors+LEDs bill of materials (BOM)
41 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | A3144 | A3144 | U1, U2, U3, U5, U6, U7, U8, U9 |
| 1 | SN74HC165N | DIP-16_W7.62mm_LongPads | U4 |
| 1 | SR_QH_Return | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Signals_OUT | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Signals_IN | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Power_IN | Pin header spacing | J4 |
| 1 | Power_OUT | Pin header spacing | J5 |
| 8 | WS2812B-B/W | WS2812B-B_W | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 |
| 9 | 0.1UF 0.1uF | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8 +1 |
| 1 | 400R | R_1206_3216Metric | R1 |
| 9 | 10KR 10kR | R_1206_3216Metric | R2, R3, R4, R5, R6, R7, R8, R9 +1 |
Sensors+LEDs design files
The KiCad project lives in the aaronluebbert/ChessLink repository on GitHub; these links point at the commit this page was built from.
Sensors+LEDs: common questions
How big is the Sensors+LEDs PCB?
The Sensors+LEDs measures 57.1 × 456.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sensors+LEDs?
41 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sensors+LEDs design files?
From the aaronluebbert/ChessLink repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sensors+LEDs design in my own project?
The repository has no license, so all rights stay with aaronluebbert. Use it as a reference, and ask the author before reusing the design.
More boards in ChessLink
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956