Air quality sensor station

AcquaV·air-quality-sensor-station·Hardware/Air_Quality.kicad_pcb

Air quality sensor station PCB layout, top view — open source ESP32 board by AcquaV

About the Air quality sensor station PCB

Air quality sensor station is an open source ESP32 PCB design by AcquaV, published on GitHub under the CC-BY-4.0 license. It is a 4-layer board measuring 65 × 45 mm, with 38 components from 22 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N4, from the ESP32 family. Other key parts include the BMP580, SCD40-D-R1, SGP41-D-R4, 2.54-2*12P弯针 and LDL1117S33R. By type, the board carries 15 capacitors, 7 resistors, 6 ICs, 2 switches, 2 diodes and 1 connector.

It belongs with the sensors, iot & wireless and displays & leds designs in this gallery.

From the project

ESP32-based multi-sensor air quality monitoring station. Integrates CO2, Temperature, Humidity, VOC, NOx and Particulate Matter (PM) sensors with optional display support and USB-C power management.

A custom, compact, high-efficiency PCB designed for advanced Indoor Air Quality (IAQ) and atmospheric pressure monitoring based on the ESP32-S3 SoC. The station features a low-power Waveshare 2.9" e-Paper Display ($296 \times 128$ px) for persistent, sunlight-readable data visualization without drawing significant power.

Microcontroller: ESP32-S3-WROOM-1-N4 (2.4 GHz Wi-Fi + BLE 5.0, Native USB). Display Interface: Waveshare 2.9" e-Paper Module ($296 \times 128$ px, Black/White) via 4-wire SPI. Environmental Sensors: SCD40 (Sensirion): Photoacoustic $\text{CO}2$, Temperature, and Relative…

Main components on the Air quality sensor station

Air quality sensor station bill of materials (BOM)

38 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BMP580
Bosch(博世)
U1
1
SCD40-D-R1
Sensirion(瑞士盛思锐)
U2
1
SGP41-D-R4
Sensirion(瑞士盛思锐)
U3
1
2.54-2*12P弯针
BOOMELE(博穆精密)
U5
1
ESP32-S3-WROOM-1-N4
ESPRESSIF(乐鑫)
U6
1
LDL1117S33R
ST(意法半导体)
U7
1
A1257WR-S-6P
CJT(长江连接器)
CN1
1
0.75A
RUILON(瑞隆源)
F1
2
C91552
2.54-1*4P反弯排针
BOOMELE(博穆精密)
H1, H2
1
C55200589
BOOT
hanxia(韩下)
SW1
1
C55200589
RESET
hanxia(韩下)
SW2
1
HYCW395-USBC16-085B
HOAUC(华宇创)
USB1
1
XL-0805QBC
KENTO
LED1
1
UZ1086L-33-TQ3-R
USBLC6-2SC6
ST(意法半导体)
D1
1
SMF5.0A
晶导微电子
D2
2
10UF
10uF
SAMSUNG(三星)
C1, C14
2
1UF
1uF
SAMSUNG(三星)
C2, C13
10
100NF
100nF
SAMSUNG(三星)
C3, C4, C5, C6, C7, C8, C10, C11 +2
1
22UF
10uF
SAMSUNG(三星)
C9
2
10K
UNI-ROYAL(厚声)
R1, R2
Show 2 more
QtyPartRefs
3
2.2K
UNI-ROYAL(厚声)
R5, R6, R9
2
5.1K
UNI-ROYAL(厚声)
R7, R8

Air quality sensor station design files

The KiCad project lives in the AcquaV/air-quality-sensor-station repository on GitHub; these links point at the commit this page was built from.

Air quality sensor station: common questions

What microcontroller does the Air quality sensor station use?

The Air quality sensor station is built around the ESP32-S3-WROOM-1-N4, from the ESP32 family.

How big is the Air quality sensor station PCB?

The Air quality sensor station measures 65 × 45 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Air quality sensor station?

38 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Air quality sensor station design files?

From the AcquaV/air-quality-sensor-station repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Air quality sensor station design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which AcquaV chose for the repository.

Can I test firmware for the Air quality sensor station without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards