6 open source boards using the SCD40-D-R1

Real designs built with the SCD40-D-R1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the SCD40-D-R1

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SCD40-D-R1 connects to, and the resistors, capacitors and other passives placed on it.

  • The SCL pin has a pull-up to 3.3V on 6 of 6 designs, most often 10 kΩ (then 4.7 kΩ).
  • The SDA pin has a pull-up to 3.3V on 6 of 6 designs, most often 10 kΩ (then 4.7 kΩ).
  • The VDD pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF (then 10 µF).
  • The VDDH pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF (then 1 µF).
DNCpin 1, 2, 3, 4, 5, 8, 11, 12, 13, 14, 15, 16, 17, 18Connected to: Not connected 100%
GNDpin 6, 20, 21Connected to: GND 100%
VDDpin 7Connected to: 3.3V 100%
  • Decoupling capacitor on 50% · 100 nF (1), 10 µF (1), 1 µF (1)
SCLpin 9Connected to: The microcontroller 100%, SGP41-D-R4 33%
  • Pull-up to 3.3V on 100% · 10 kΩ (3), 4.7 kΩ (2), 2.2 kΩ (1)
SDApin 10Connected to: The microcontroller 100%, SGP41-D-R4 33%
  • Pull-up to 3.3V on 100% · 10 kΩ (3), 4.7 kΩ (2), 2.2 kΩ (1)
VDDHpin 19Connected to: 3.3V 100%
  • Decoupling capacitor on 50% · 100 nF (2), 1 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Aeroq by EnriqueNeyra, Air quality sensor station by AcquaV, SuperNicePCB by laemo10 and Airquality by MorgenWebDigital.

The SCD40-D-R1 in open source designs

The gallery holds 6 open source boards using the SCD40-D-R1 from 6 GitHub repositories; a typical one measures about 55 × 49 mm and carries around 53 components.

50% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.

The most starred is Aeroq by EnriqueNeyra.

Microcontrollers on boards using the SCD40-D-R1

SCD40-D-R1: common questions

Where can I find a SCD40-D-R1 reference design?

Each of the 6 boards on this page is a real design using the SCD40-D-R1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the SCD40-D-R1 SCL pin?

The SCL pin has a pull-up to 3.3V on 6 of 6 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 6 open source designs using the SCD40-D-R1.

What pull-up resistor is used on the SCD40-D-R1 SDA pin?

The SDA pin has a pull-up to 3.3V on 6 of 6 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 6 open source designs using the SCD40-D-R1.

What decoupling capacitors do designs use on the SCD40-D-R1 VDD pin?

The VDD pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the SCD40-D-R1.

What parts are used alongside the SCD40-D-R1?

The SGP41-D-R4, AMS1117-3.3, ESP32-C3-WROOM-02-N4, SHT41-AD1B-R2 and T117Z appear in the most repositories here.

Which microcontrollers do boards using the SCD40-D-R1 use?

Most are built on ESP32 (5) and AVR/Arduino (1).

How big is a typical board using the SCD40-D-R1?

The median is 55 × 49 mm, and 50% are two-layer designs.

What is the most popular open source board using the SCD40-D-R1?

By GitHub stars, Aeroq by EnriqueNeyra, with 130 stars.

Can I simulate one of these boards using the SCD40-D-R1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part