HardLabs

Jukebox io

adeboni·math-camp-synth·2025-Jukebox/hardware/jukebox_io/jukebox_io.kicad_pcb

Jukebox io PCB layout, top view — open source RP2040/RP2350 board by adeboni

About the Jukebox io PCB

Jukebox io is an open source RP2040/RP2350 PCB design by adeboni, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 60.6 × 108 mm, with 149 components from 43 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MAX7313, W5500, R-783.3-1.0, W25Q128JVS and R-785.0-1.0. By type, the board carries 77 resistors, 37 capacitors, 10 connectors, 9 transistors, 8 ICs and 2 crystals.

It belongs with the audio designs in this gallery.

From the project

Burning Man Math Camp Synthesizers

Main components on the Jukebox io

MAX7313RP2040W5500R-783.3-1.0W25Q128JVSR-785.0-1.0

Jukebox io bill of materials (BOM)

149 components, 43 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
MAX7313
U1, U6, U7
1
RP2040
U2
1
W5500
U3
1
R-783.3-1.0
U4
1
W25Q128JVS
U5
1
R-785.0-1.0
U8
2
MMBT2222
Q1, Q2
7
BSS138
Q3, Q4, Q5, Q6, Q7, Q8, Q9
1
12MHZ
12MHz
Y1
1
25MHZ
25MHz
Y2
1
Conn_01x03
J1
1
Conn_02x12_Odd_Even
J2
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J5
1
SI-46001-F
J10
1
Conn_02x05_Odd_Even
J11
1
MOUTH_LEDS
J12
1
DISPLAY_1
J13
1
DISPLAY_2
J14
1
ROTARY_SWITCH
J17
1
HEAD_LEDS
J18
Show 23 more
QtyPartRefs
2
10k
RV1, RV3
2
SW_Push
SW1, SW2
1
SM4007
D1
1
C1002
FerriteBead
FB1
21
100N
100n
C1, C2, C3, C4, C5, C6, C7, C8 +13
2
1u
C10, C11
5
10U
10u
C22, C28, C34, C35, C36
2
27P
27p
C23, C27
2
22P
22p
C24, C26
2
10N
10n
C25, C30
2
6.8N
6.8n
C31, C33
1
100U
100u
C32
38
5.1K
5.1k
R1, R2, R24, R25, R26, R27, R28, R29 +30
2
27
R3, R4
17
10K
10k
R5, R9, R11, R64, R65, R66, R67, R70 +9
4
4.7
R6, R7, R8, R10
4
49.9
R12, R13, R14, R15
1
1M
R16
5
1k
R17, R22, R23, R50, R51
2
470
R18, R19
1
12.4K
12.4k
R20
1
10
R21
2
220
R46, R47

Jukebox io design files

The KiCad project lives in the adeboni/math-camp-synth repository on GitHub; these links point at the commit this page was built from.

Jukebox io: common questions

What microcontroller does the Jukebox io use?

The Jukebox io is built around the RP2040, from the RP2040/RP2350 family.

How big is the Jukebox io PCB?

The Jukebox io measures 60.6 × 108 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Jukebox io?

149 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Jukebox io design files?

From the adeboni/math-camp-synth repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Jukebox io design in my own project?

Yes, under the terms of its GPL-3.0 license, which adeboni chose for the repository.

Can I test firmware for the Jukebox io without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in math-camp-synth

Similar boards