HardLabs

Jukebox

adeboni·math-camp-synth·2025-Jukebox/hardware/jukebox/jukebox.kicad_pcb

Jukebox PCB layout, top view — open source RP2040/RP2350 board by adeboni

About the Jukebox PCB

Jukebox is an open source RP2040/RP2350 PCB design by adeboni, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 70.8 × 108 mm, with 158 components from 49 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the PCM5100A, W5500, PDC54-11GWA, 74HC595 and R-783.3-1.0. By type, the board carries 61 resistors, 59 capacitors, 13 ICs, 9 switches, 7 connectors and 2 transistors.

It belongs with the audio designs in this gallery.

From the project

Burning Man Math Camp Synthesizers

Main components on the Jukebox

PCM5100ARP2040W5500PDC54-11GWA74HC595R-783.3-1.0W25Q128JVSPJS008U-3000-0NE5532MCP6002-XSN74HC165

Jukebox bill of materials (BOM)

158 components, 49 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
PCM5100A
U1
1
RP2040
U2
1
W5500
U3
1
PDC54-11GWA
U4
2
74HC595
U5, U8
1
R-783.3-1.0
U6
1
W25Q128JVS
U7
1
PJS008U-3000-0
U9
2
NE5532
U10, U11
1
MCP6002-XSN
MCP6002-xSN
U12
1
74HC165
U13
2
MMBT3904
Q1, Q2
1
12MHZ
12MHz
Y1
1
25MHZ
25MHz
Y2
1
AudioJack3_SwitchTR
J1
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J2
1
AudioJack2_SwitchT
J3
1
SI-46001-F
J4
1
Conn_01x04
J5
1
Conn_02x05_Odd_Even
J6
Show 29 more
QtyPartRefs
1
Conn_01x03
J7
1
100k
RV1
2
SW_Push
SW1, SW2
7
SW_Push
SW3, SW4, SW5, SW6, SW7, SW8, SW9
2
SM4007
D1, D2
2
C1002
FerriteBead
FB1, FB3
32
100N
100n
C1, C2, C3, C4, C5, C6, C7, C8 +24
3
1u
C10, C11, C44
11
10U
10u
C12, C30, C36, C37, C39, C41, C42, C47 +3
2
27P
27p
C24, C28
2
22P
22p
C25, C29
2
10N
10n
C26, C32
2
6.8N
6.8n
C33, C34
1
100U
100u
C35
2
2.2U
2.2u
C43, C49
2
2.2N
2.2n
C50, C51
5
1k
R1, R2, R24, R25, R38
16
100
R3, R6, R13, R17, R18, R28, R31, R32 +8
2
27
R4, R5
4
5.1K
5.1k
R7, R10, R59, R61
14
10K
10k
R8, R14, R16, R43, R44, R45, R46, R47 +6
4
4.7
R9, R11, R12, R15
4
49.9
R19, R20, R21, R22
1
1M
R23
4
470
R26, R27, R34, R42
1
12.4K
12.4k
R29
1
10
R30
4
75
R52, R53, R56, R57
1
100K
100k
R60

Jukebox design files

The KiCad project lives in the adeboni/math-camp-synth repository on GitHub; these links point at the commit this page was built from.

Jukebox: common questions

What microcontroller does the Jukebox use?

The Jukebox is built around the RP2040, from the RP2040/RP2350 family.

How big is the Jukebox PCB?

The Jukebox measures 70.8 × 108 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Jukebox?

158 components, from 49 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Jukebox design files?

From the adeboni/math-camp-synth repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Jukebox design in my own project?

Yes, under the terms of its GPL-3.0 license, which adeboni chose for the repository.

Can I test firmware for the Jukebox without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in math-camp-synth

Similar boards