HardLabs

Canbus ui

adeboni·math-camp-synth·2023-Jukebox/hardware/canbus_ui/canbus_ui.kicad_pcb

Canbus ui PCB layout, top view — open source RP2040/RP2350 board by adeboni

About the Canbus ui PCB

Canbus ui is an open source RP2040/RP2350 PCB design by adeboni, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 100 mm, with 102 components from 37 distinct parts.

Its main chip is the 74HC595, from the RP2040/RP2350 family. Other key parts include the R-78E5.0-0.5, AMS1117-3.3, W25Q128JVS, MCP2515-XST and MCP2551-I-SN. By type, the board carries 26 resistors, 24 capacitors, 23 connectors, 8 ICs, 6 diodes and 4 transistors.

It belongs with the audio designs in this gallery.

From the project

Burning Man Math Camp Synthesizers

Main components on the Canbus ui

74HC595R-78E5.0-0.5AMS1117-3.3W25Q128JVSMCP2515-XSTMCP2551-I-SNRP2040

Canbus ui bill of materials (BOM)

102 components, 37 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
74HC595
U1, U2
1
R-78E5.0-0.5
U4
1
AMS1117-3.3
U5
1
W25Q128JVS
U6
1
MCP2515-XST
MCP2515-xST
U7
1
MCP2551-I-SN
U8
1
RP2040
U9
4
2N7002
Q1, Q2, Q3, Q4
1
8MHZ
8Mhz
Y1
1
12MHZ
12MHz
Y2
3
Conn_02x03_Odd_Even
J1, J21, J22
2
RJ45
J2, J3
2
Conn_02x08_Odd_Even
J4, J23
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J5
4
Conn_01x02
J6, J7, J8, J9
8
Conn_01x04
J10, J11, J12, J13, J14, J15, J16, J17
2
Conn_01x03
J18, J19
1
Conn_01x03
J20
1
SolderJumper_2_Open
JP1
1
PRM3W-E12-D12-S
PS1
Show 17 more
QtyPartRefs
6
10k
RV1, RV2, RV3, RV4, RV5, RV6
1
SW_DIP_X04
SW_DIP_x04
SW1
3
1N4148W
D1, D2, D3
3
LED
D4, D5, D6
4
27P
27p
C5, C6, C16, C17
6
10U
10u
C7, C8, C11, C12, C13, C14
12
100N
100n
C9, C10, C15, C18, C19, C21, C23, C24 +4
2
1u
C20, C22
4
100
R1, R2, R3, R4
10
1k
R5, R6, R7, R8, R9, R10, R11, R12 +2
3
220
R13, R15, R24
1
560
570
R14
1
DNF
R17
2
120
R19, R25
2
27
R20, R21
2
5.1K
5.1k
R22, R23
1
10K
10k
R26

Canbus ui design files

The KiCad project lives in the adeboni/math-camp-synth repository on GitHub; these links point at the commit this page was built from.

Canbus ui: common questions

What microcontroller does the Canbus ui use?

The Canbus ui is built around the 74HC595, from the RP2040/RP2350 family.

How big is the Canbus ui PCB?

The Canbus ui measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Canbus ui?

102 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Canbus ui design files?

From the adeboni/math-camp-synth repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Canbus ui design in my own project?

Yes, under the terms of its GPL-3.0 license, which adeboni chose for the repository.

Can I test firmware for the Canbus ui without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in math-camp-synth

Similar boards