Flight-Controller
About the Flight-Controller PCB
Flight-Controller is an open source PCB design by AditiLonkadi, published on GitHub. It is a 4-layer board measuring 50 × 50 mm, with 76 components from 36 distinct parts.
Other key parts include the MPRLS0015PA0000SA, AP2112K-3.3, PCA9685PW, CAT24C256 and USBLC6-2SC6. By type, the board carries 30 capacitors, 17 resistors, 7 ICs, 7 diodes, 2 inductors and 1 fuse.
It belongs with the robotics & motion designs in this gallery.
From the project
Flight Controller development using STM32
Main components on the Flight-Controller
Flight-Controller bill of materials (BOM)
76 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MPRLS0015PA0000SA | MPRLS0015PA0000SA | IC1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | PCA9685PW | TSSOP-28_4.4x9.7mm_P0.65mm | U2 |
| 1 | CAT24C256 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | C5514 74AHC1GU04GW,125 | SOT65P212X110-5N | U5 |
| 1 | CH340E | MSOP10 | U6 |
| 2 | TDD01H0SB1R | SOT175P420X230-3N | BOOT1, BOOT2 |
| 1 | TLC-FSMD050 Fuse | Fuse_0603_1608Metric | F1 |
| 1 | W25N01GVZEIG W25N01GVZEIG_TR | SON127P800X600X80-9N-D | FLASH1 |
| 1 | ABM8-16.000MHZ-B2-T 16MHz | Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | HSE1 |
| 1 | Conn_01x04 | Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | I2C |
| 1 | BMX055 | LGA_PACKAGE_20_PINS | IMU1 |
| 1 | Jumper_NO_Small | PinHeader_1x02_P1.27mm_Vertical | JP1 |
| 1 | Conn_02x08_Odd_Even | PinHeader_2x08_P2.54mm_Vertical | PWM_PWR1 |
| 1 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | PWM_SIGNAL1 |
| 1 | SKRPANE010 | SKRPADE010 | RESET1 |
| 1 | TrmnlBlck | TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | SERVO1 |
| 1 | GR | LED_0603_1608Metric | PWR1 |
| 2 | D_Schottky | D_SOD-323 | D1, D6 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GR | LED_0603_1608Metric | D2 |
| 1 | RE | LED_0603_1608Metric | D3 |
| 2 | BL | LED_0603_1608Metric | D4, D5 |
| 1 | YE | LED_0603_1608Metric | D7 |
| 2 | SDCL1005C10NJTDF FB_Small | L_0402_1005Metric | FB1, FB2 |
| 3 | 1u | C_0402_1005Metric | C1, C2, C22 |
| 1 | 10U 10u | C_0402_1005Metric | C3 |
| 21 | 100N 100n | C_0402_1005Metric | C4, C5, C6, C7, C8, C9, C10, C11 +13 |
| 2 | 2U2 2u2 | C_0402_1005Metric | C14, C15 |
| 2 | 10P 10p | C_0402_1005Metric | C20, C21 |
| 1 | 1n | C_0402_1005Metric | C24 |
| 7 | 2K2 2k2 | R_0402_1005Metric | R1, R2, R6, R7, R8, R9, R15 |
| 3 | 1k | R_0402_1005Metric | R3, R4, R5 |
| 1 | 470 620 | R_0402_1005Metric | R10 |
| 2 | 22 | R_0402_1005Metric | R11, R13 |
| 4 | 10K 10k | R_0402_1005Metric | R12, R14, R16, R17 |
Flight-Controller design files
The KiCad project lives in the AditiLonkadi/Flight-Controller repository on GitHub; these links point at the commit this page was built from.
Flight-Controller: common questions
How big is the Flight-Controller PCB?
The Flight-Controller measures 50 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Flight-Controller?
76 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Flight-Controller design files?
From the AditiLonkadi/Flight-Controller repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Flight-Controller design in my own project?
The repository has no license, so all rights stay with AditiLonkadi. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Mesabob
rene-dev
87.5 × 50 mm44 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
Triple adapter
57 × 75 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979