3 open source boards using the MPRLS0015PA0000SA

Real designs built with the MPRLS0015PA0000SA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The MPRLS0015PA0000SA in open source designs

The gallery holds 3 open source boards using the MPRLS0015PA0000SA from 3 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 76 components.

100% use four copper layers or more, and 33% carry an open source license.

The most starred is Actuator board by cvra.

Parts used alongside the MPRLS0015PA0000SA

Microcontrollers on boards using the MPRLS0015PA0000SA

What boards using the MPRLS0015PA0000SA are built for

MPRLS0015PA0000SA: common questions

Where can I find a MPRLS0015PA0000SA reference design?

Each of the 3 boards on this page is a real design using the MPRLS0015PA0000SA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the MPRLS0015PA0000SA?

The AP2112K-3.3, C5514, CAT24C256, CH340E and PCA9685PW appear in the most repositories here.

Which microcontrollers do boards using the MPRLS0015PA0000SA use?

Most are built on STM32 (1).

How big is a typical board using the MPRLS0015PA0000SA?

The median is 50 × 50 mm, and 0% are two-layer designs.

What is the most popular open source board using the MPRLS0015PA0000SA?

By GitHub stars, Actuator board by cvra, with 2 stars.

Can I simulate one of these boards using the MPRLS0015PA0000SA before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part