HardLabs

Routeur solaire

aginies·routeur_solaire·board/solaire.kicad_pcb

This repository ships a schematic but no board layout.

About the Routeur solaire PCB

Routeur solaire is an open source ESP32 PCB design by aginies, published on GitHub. It is a 2-layer board, with 8 components from 8 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AMS1117 and DS18B20. By type, the board carries 3 ICs, 1 connector, 1 fuse, 1 switch, 1 diode and 1 resistor.

It belongs with the iot & wireless, power & battery and displays & leds designs in this gallery.

From the project

Un Routeur Solaire autonome

This project is a high-performance C++ implementation of a Photovoltaic (PV) Router, optimized for the ESP32 platform using the Arduino framework and PlatformIO.

Ce projet est une implémentation C++ haute performance d'un Routeur Solaire Photovoltaïque (PV), optimisée pour la plateforme ESP32 en utilisant le framework Arduino et PlatformIO.

This C++ version is a migration from the original MicroPython implementation for domotique. The migration was performed by AI agents to achieve better performance, lower latency, and more robust execution on resource-constrained hardware.

Main components on the Routeur solaire

ESP32-S3-WROOM-1AMS1117DS18B20

Routeur solaire bill of materials (BOM)

8 components, 8 distinct parts.

QtyPartRefs
1
ESP32-S3-WROOM-1
U1
1
AMS1117
U2
1
DS18B20
U3
1
USB_C_Plug_USB2.0
P1
1
Polyfuse
F1
1
SW_Push
SW1
1
PRTR5V0U2X
D1
1
R
R1

Routeur solaire design files

The KiCad project lives in the aginies/routeur_solaire repository on GitHub; these links point at the commit this page was built from.

Routeur solaire: common questions

What microcontroller does the Routeur solaire use?

The Routeur solaire is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Routeur solaire PCB?

The Routeur solaire has 2 copper layers and is 1.6 mm thick.

How many components are on the Routeur solaire?

8 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Routeur solaire design files?

From the aginies/routeur_solaire repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Routeur solaire design in my own project?

The repository has no license, so all rights stay with aginies. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Routeur solaire without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards