SBC
ahmedsiddyq·mine_sweeper·circuts/SBC/SBC.kicad_pcb
About the SBC PCB
SBC is an open source ESP32 PCB design by ahmedsiddyq, published on GitHub. It is a 2-layer board measuring 108.2 × 124.9 mm, with 366 components from 69 distinct parts.
Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the PIC16F15243-I/SS, UC3843, BTS7960B, LM358DT and AMS1117-3.3. By type, the board carries 117 resistors, 101 capacitors, 63 diodes, 14 ICs, 13 connectors and 10 transistors.
From the project
A software implementation of the classic Minesweeper game.
Main components on the SBC
SBC bill of materials (BOM)
366 components, 69 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC16F15243-I/SS PIC16F15243-I_SS | SSOP20_SS_MCH-M | IC1 |
| 1 | UC3843 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 4 | BTS7960B | DPAK127P1490X440-8N | U2, U3, U7, U8 |
| 2 | LM358DT STMicroelectronics | SOIC-8_3.9x4.9mm_P1.27mm | U4, U9 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U5 |
| 1 | ESP32-DEVKIT-V1 | MODULE_ESP32_DEVKIT_V1 | U10 |
| 1 | ~ | PinHeader_1x08_P2.54mm_Vertical | U11 |
| 2 | L7805 | TO-252-2 | U12, U13 |
| 1 | L7809 | TO-220-3_Vertical | U14 |
| 6 | MMBTA06 | SOT-23 | Q1, Q2, Q3, Q5, Q6, Q7 |
| 2 | IRFS4227 | TO-263-3_TabPin2 | Q4, Q8 |
| 1 | BC817 | SOT-23 | Q10 |
| 1 | AO3400A | SOT-23_Handsoldering | Q11 |
| 1 | 640456-3 TE Connectivity AMP Connectors | TE_640456-3 | J1 |
| 1 | B5B-XH-A(LF)(SN) B5B-XH-A_LF__SN_ JST Sales America Inc. | JST_B5B-XH-A_LF__SN_ | J2 |
| 1 | Power | TE_282837-2 | J3 |
| 3 | DE9_Plug | DB9 | J4, J8, J10 |
| 2 | OSTTC060162 On Shore Technology Inc. | CONN_6P-OSTTC_OST | J5, J7 |
| 1 | XT60-M | AMASS_XT60-M | J6 |
| 1 | buzzer | TE_282837-2 | J11 |
Show 49 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x04_Pin | PinSocket_1x04_P2.54mm_Vertical | J13 |
| 1 | 5v Power | TE_282837-2 | J14 |
| 1 | Barrel_Jack_MountingPin | BarrelJack_GCT_DCJ200-10-A_Horizontal | J15 |
| 2 | 1A | D_SOD-128 | F3, F4 |
| 2 | 1A | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | F5, F7 |
| 2 | R_Potentiometer | Potentiometer_Bourns_3214W_Vertical | RV1, RV2 |
| 6 | SW_Push | SW_DIP_SPSTx01_Slide_6.7x4.1mm_W6.73mm_P2.54mm_LowProfile_JPin | SW1, SW2, SW3, SW4, SW5, SW7 |
| 1 | rst | SW_DIP_SPSTx01_Slide_6.7x4.1mm_W6.73mm_P2.54mm_LowProfile_JPin | SW6 |
| 2 | 3.3v | D_MiniMELF | ZD1, ZD8 |
| 12 | BZV55B4V7 | D_MiniMELF | ZD2, ZD3, ZD4, ZD5, ZD6, ZD7, ZD10, ZD11 +4 |
| 1 | 20v | D_MiniMELF | ZD9 |
| 20 | 3.3v | D_SOD-123 | ZD13, ZD14, ZD15, ZD16, ZD17, ZD18, ZD19, ZD20 +12 |
| 9 | LED | D_MiniMELF | D1, D4, D5, D10, D12, D13, D14, D43 +1 |
| 23 | 1N4004-T 1N4004-T_NRND Diodes Incorporated | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3, D6, D7, D46, D47, D48, D49 +15 |
| 6 | SMAJ6.5A | D_MiniMELF | D8, D15, D16, D17, D18, D19 |
| 3 | BZV55B3V3 | D_MiniMELF | D11, D21, D24 |
| 4 | 1N4004-T 1N4004-T_NRND Diodes Incorporated | D_MiniMELF | D20, D25, D26, D45 |
| 10 | 1N5822 | D_MiniMELF | D29, D30, D31, D32, D37, D38, D39, D40 +2 |
| 4 | SMAJ26A | D_MiniMELF | D33, D34, D35, D36 |
| 2 | L_LED | D_MiniMELF | D50, D52 |
| 2 | R_LED | D_MiniMELF | D51, D53 |
| 19 | 2uf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C5, C10, C13, C14, C15, C16, C46 +11 |
| 14 | 1nf | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C2, C11, C18, C22, C26, C36, C41, C42 +6 |
| 20 | 100nf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C7, C9, C17, C48, C49, C50, C66 +12 |
| 11 | 470uf | CP_Radial_D8.0mm_P5.00mm | C6, C19, C23, C27, C37, C54, C57, C60 +3 |
| 1 | 2pf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 2 | 33uf | CP_Radial_D4.0mm_P1.50mm | C12, C91 |
| 14 | 2uf | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | C20, C21, C28, C29, C34, C38, C39, C40 +6 |
| 15 | 100nf | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | C24, C25, C30, C31, C32, C33, C35, C73 +7 |
| 4 | C | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C75, C76, C77, C94 |
| 1 | 470uf | CP_Elec_4x4.5 | C81 |
| 11 | 2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R9, R12, R15, R16, R17, R30, R38 +3 |
| 10 | 220 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R11, R13, R34, R35, R76, R114 +2 |
| 7 | 56k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R28, R29, R32, R54, R55, R58 |
| 10 | 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R14, R36, R37, R60, R61, R62 +2 |
| 4 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R21, R50, R51 |
| 32 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R24, R25, R39, R52, R53, R64, R65 +24 |
| 5 | 2.2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R22, R33, R89, R118 |
| 3 | 0.3 | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R18, R20, R49 |
| 5 | 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19, R23, R46, R77, R112 |
| 1 | 26k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26 |
| 3 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27, R31, R57 |
| 4 | 200 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R40, R88, R100, R106 |
| 4 | 1.5k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R41, R111, R115, R116 |
| 1 | 10 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R42 |
| 2 | 5k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R59, R73 |
| 9 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R72, R74, R75, R84, R85, R86, R87, R109 +1 |
| 4 | 1ohm | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R99, R102, R104, R105 |
| 2 | 1ohm op* | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R101, R113 |
SBC design files
The KiCad project lives in the ahmedsiddyq/mine_sweeper repository on GitHub; these links point at the commit this page was built from.
- Layoutcircuts/SBC/SBC.kicad_pcb
- Schematiccircuts/SBC/SBC.kicad_sch
SBC: common questions
What microcontroller does the SBC use?
The SBC is built around the ESP32-DEVKIT-V1, from the ESP32 family.
How big is the SBC PCB?
The SBC measures 108.2 × 124.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SBC?
366 components, from 69 distinct parts. The full bill of materials is listed on this page.
Where can I download the SBC design files?
From the ahmedsiddyq/mine_sweeper repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SBC design in my own project?
The repository has no license, so all rights stay with ahmedsiddyq. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SBC without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in mine_sweeper
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k